Environment Sensors Module for Raspberry Pi Pico

Environment Sensors Module for Raspberry Pi Pico, I2C Bus
Artikelnummer: 12094

Delivery Time: ab Lager

Verfügbarkeit: Zur Zeit nicht an Lager

CHF 35.90
Waveshare
Artikelbeschrieb
Details

Featues

The Pico-Environment-Sensor gives Raspberry Pi Pico the ability to collect environment data like temperature & humidity, air pressure, ambient light intensity, VOC, IR ray, UV ray, etc. It can also be used to build a robot that can detect motion and orientation.

  • Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series
  • Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
  • Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
  • Onboard MPU9250 motion sensor, accelerometer, gyroscope, and magnetometer
  • Onboard LTR390-UV-1 sensor, for measuring UV rays
  • Onboard SGP40 sensor, for detecting ambient VOC
  • I2C bus, allows retrieving data by just using two wires
  • Comes with development resources and manual (MicroPython example)

Specifications

TSL25911FN DIGITAL AMBIENT LIGHT SENSOR
I2C address 0x29
Effective range 0~88000Lux
BME280 TEMPERATURE, HUMIDITY, AND AIR PRESSURE SENSOR
I2C address 0x76
Temperature detection -40 ~ 85℃ (0.01℃ resolution, ±1℃ accuracy)
Humidity detection 0~100%RH (0.008%RH resolution, ±3%RH accuracy, 1s response time, ≤2%RH delay)
Air pressure detection 300~1100hPa (0.18Pa resolution, ±1hPa accuracy)
MPU9250 MOTION SENSOR
(9-DOF: 3-AXIS ACCELEROMETER, 3-AXIS GYROSCROPE, 3-AXIS MAGNETOMETER)
I2C address 0x68
Accelerometer resolution 16-bit
Accelerometer range (configurable) ±2, ±4, ±8, ±16g
Gyroscope resolution 16-bit
Gyroscope range (configurable) ±250, ±500, ±1000, ±2000°/sec
Magnetometer resolution 14-bit
Magnetometer range ±4800µT
LTR390-UV-1 UV SENSOR
I2C address 0x53
Response wavelength 300nm ~ 350nm
SGP40 VOC SENSOR
I2C address 0x59
Measuring range 0 ~ 1,000 ppm ethanol equivalent
Limit condition < 0.05 ppm ethanol equivalent OR < 10 % preset concentration point (the larger one should prevail)
Response time < 10 s (tau 63 %)
Start time < 60 s
On-chip humidity compensation support
 

What's On Board

  1. TSL25911FN
    digital ambient light sensor, for measuring IR and visible light
  2. LTR390-UV-1
    UV sensor
  3. SGP40
    VOC sensor
  4. MPU9250
    3-axis accelerometer, 3-axis gyroscrope, 3-axis magnetomete
  5. BME280
    temperature, humidity, and air pressure sensor
  6. Voltage level translator
    5V to 3.3V/1.8V
  7. I2C selection
 
 
 
 
Zusatzinformation
Zusatzinformation
Connector Nein