Raspberry Pi Compute Module 3, ARM Cortex-A53, BCM2837
Mit 4GB eMMC
Delivery Time: ab Lager
Verfügbarkeit: Zur Zeit nicht an Lager
Downloads & Links
Raspberry Compute Modules (Version 3)
Die Raspberry Compute Modules (Version 3) von Raspberry Pi sind für Entwickler geeignet, die die Funktionalität des Raspberry Pi3 wünschen, für ihre eingebetteten Designs aber einen kleineren Formfaktor (67,6 x 31 mm) benötigen.
Diese Module sind DDR2-SODIMM, mechanisch kompatible System-On-Module (SoMs) mit einem BCM2837-Prozessor System-on-Chip (SoC) mit 1 GB LPDDR2 RAM und 4 GB eMMC FLASH-Speicher. Auch diese Module haben extra weitere Eingang/Ausgangs-(E/A-)Schnittstellen zuzüglich zu den Raspberry Pi-Platinen, Modell A/B.
Compute Module 3 – mit eMMC-Flash und SD/eMMC
Compute Module 3 Lite – ohne eMMC-Flash und SD/eMMC
Note
Raspberry Pi guarantee the availability of CM3 and CM3 Lite until at least January 2023.
- SoC – Broadcom BCM2837 quad core Cortex A53 processor @ 1.2 GHz with Videocore IV GPU
- System Memory – 1GB LPDDR2
- Storage
- CM3 Lite – SD card signals through SO-DIMM connector
- CM3 – 4GB eMMC flash
- 200-pin edge connector with:
- 48x GPIO
- 2x I2C, 2x SPI, 2x UART
- 2x SD/SDIO, 1x NAND interface (SMI)
- 1x HDMI 1.3a
- 1x USB 2.0 HOST/OTG
- 1x DPI (Parallel RGB Display)
- 1x 4-lane CSI Camera Interface (up to 1Gbps per lane), 1x 2-lane CSI Camera Interface (up to 1Gbps per lane)
- 1x 4-lane DSI Display Interface (up to 1Gbps per lane), 1x 2-lane DSI Display Interface (up to 1Gbps per lane)
- Power Supply – VBAT (2.5V to 5.0V) for BCM2837 processor core, 3.3V for PHYs, UI and eMMC flash, 1.8V for PHYs, IO, and SDRAM, VDAC (2.8V typ.) for video composite DAC, GPIO0-27_VREF & GPIO28-45_VREF (1.8 to 3.3V) for the two GPIO banks.
- Dimensions – 67.6 x 31 mm; compliant with JEDEC MO-224 mechanical specification used in DDR2 SO-DIMM memory module
- Temperature Range – -25 to +80 degrees Celsius