USB-C Adapter For NGFF SSD
- To use with a PC or Raspberry Pi, you can just connect the adapter by USB cable.
- When using a phone, please use OTG cable.
- Some of the phones and PC couldn't supply enough power to the USB ports, and it causes frame/speed drop problems. USB 3.0 port is recommended.
- If you want to use Type C to Type C cable, need to remove the two CC resistors on the backside, otherwise, it cannot work.
- This adapter can only support M.2 SATA interface. Could not be used with NVME SSD.
Artikelnummer:
11819
Delivery Time: ab Lager
Verfügbarkeit: Zur Zeit nicht an Lager
CHF 18.90
Artikelbeschrieb
Details
Immersion Gold Process
Double Sides Immersion Gold Process, Combined With The Tiny Through Holes,
USB-C ADAPTER FOR SSD
For NGFF M.2 SSD, Fast Reading/Writing, Reutilizing Your Idle SSD
Transforming SSD into USB flash drive
Fast Reading/Writing
USB-C Connector, Up To 6 Gbps/S Theoretical Data Rate,
Faster Reading/Writing Speed Than Normal USB Flash Drive,
Releasing The Original Performance Of SSD
M.2 NGFF Protocol Support
Transforming SSD Into USB Flash Drive
Transforming Your M.2 SSD Into A Fresh New USB Flash Drive In Seconds
Compatible With Different Sizes Of M.2 SSD
Compatible With M.2 SSD In 2230 / 2242 / 2260 / 2280 Specifications
Immersion Gold Process
Better Heat Dissipation
Double Sides Immersion Gold Process, Combined With The Tiny Through Holes,
Faster Heat Dissipation Effect
Onboard Operating Indicator
The LED Lights Up When Power-On, And Keeps Blinking While Reading/Writing
Wiki: USB_TO_SATA
content
Weight: 0.028 kg
- USB-C adapter for SSD x1
- USB3.0 Type-A to Type-C cable ~15cm x1
- Screwdriver x1
- Screw x1