SX1303 868M LoRaWAN Gateway Module/HAT for Raspberry Pi
SX1303 868M LoRaWAN Gateway Module including HAT for Raspberry Pi
Delivery Time: ab Lager
Verfügbarkeit: Sofort-Versand ab Lager
SX1303 868m LoRaWAN Gateway Module/HAT
Standard Mini-PCIe Socket
Features
This product is a LoRa Gateway module that incorporates a new-generation SX1303 normal band chip. It has lots of advantages including long-range transmission, large capacity node, and high receiving sensitivity. In addition, SX1303 supports concurrent communication. Due to the outstanding performance of SX1303 on low power consumption, the heat dissipation design of the Gateway can be simplified, thus reducing material cost, also achieving a smaller size.
LoRaWAN Gateway Module features:
- Integrates Semtech SX1303 normal band and SX1250 radio RF frond-end chip
- Onboard PA and LNA, features +26dBm emit power and -141dBm high sensitivity receiving gain
- The SX1303 supports Fine Timestamp and network positioning based on time difference of arrival (TDOA)
- 52-pin Mini-PCIe socket for easy integration into various embedded systems
- Onboard 4 LED indicators for module operating status
- Comes with development resources and manual (example in C)
HAT features:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Incorporate L76K module with GPS/BD support, provide accurate clock and location info for gateway module
- Comes with development resources and manual (example in C)
Specifications
BAND CHIP | SX1303 | |||
---|---|---|---|---|
868M | ||||
FREQUENCY RANGE | 868M: EU868, |
|||
POWER SUPPLY | 5V | |||
MODULATION | LoRa/(G)FSK | |||
EMIT POWER | +26dBm@5V | |||
RECEIVING SENSITIVITY | -141dBm@125KHz/SF12 -121dBm@125KHz/SF5 |
|||
OVERALL POWER CONSUMPTION | emitting: 454mA@5V receiving: 42mA@5V sleep: 11mA@5V |
emitting: 427mA@5V receiving: 40mA@5V sleep: 8mA@5V |
||
COMMUNICATION BUS | SPI, I2C | |||
EXTERNAL CONNECTOR | Mini-PCIe | |||
OPERATING TEMPERATURE | -40~85℃ | |||
DIMENSIONS | 50.95 x 30mm |
Performance-Upgraded SX1302/3 Chip
Onboard Semtech SX1302/3 Band Chip
Lower Power Consumption, Fast Data Rate, Longer Distance
Multiple Channels Smooth Communication
A Better Solution For Concurrent High Throughput Situation
FEC Forward Error Correction Algorithm
The New Generation LoRa Spread Spectrum Technology,
Higher Anti-Interference Performance, Longer Communication Distance
SX1303 Supports Fine Timestamp
Network Positioning Based On Time Difference Of Arrival (TDOA)
What's On Board
- SX1302/3 LoRaWAN Gateway module
- Mini-PCIe socket and buckle
- L76K module
- RT9193-33 power chip
- Status indicator
PWR: power indicator
RXD/TXD: UART RX/TX indicator
PPS: GPS status indicator
- Raspberry Pi GPIO header
for connecting with Raspberry Pi series boards - L76K antenna connector
- LoRa Gateway antenna connector
- Battery holder
supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
- SX1303 LoRaWAN Gateway HAT x1
- SX1303 LoRaWAN Gateway Module (B) x1
- Antenna 868M 5dBi x1
- GPS antenna x1
- 2×20PIN female pinheader x1
- Dual IPEX1 wire x1
- Screws pack x1