Sie haben keine Artikel im Warenkorb.
SX1262 LoRaWAN Node Module Expansion Board for Raspberry Pi
SX1262 LoRaWAN Node Module Expansion Board for Raspberry Pi, With Magnetic CB antenna, Frequency Band 868/915
Artikelnummer:
12162
Delivery Time: ab Lager
Verfügbarkeit: Sofort-Versand ab Lager
CHF 18.90
Artikelbeschrieb
Details
This LoRa module HAT is using the new generation of SX1262 RF chip, with the features of long communication distance and strong anti-interference ability. Suitable for Sub-GHz frequency band network, and is available in HF (850~930MHz) frequency band version. Combined with a LoRa gateway, it can be connected to servers such as TTN to build a LoRaWAN network.
Common features:
- Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi series boards
- The new generation SX1262 has higher power efficiency and longer transmission distance than the SX1278
- Suitable for Sub-GHz band, combined with the gateway, can be quickly connected to a cloud server such as TTN to build a LoRaWAN network
Specifications
LORA PARAMETERS | |
---|---|
RF CHIP | SX1262 |
FREQUENCY BAND | HF: 850 ~ 930MHz |
MODULATION | LoRa / (G)FSK |
DATA RATE | LoRa: 0.018 ~ 62.5Kbps (G)FSK: 0.6 ~ 300Kbps |
EMIT POWER | [email protected] |
SPREADING FACTOR | SF7 ~ SF12 |
OPERATING VOLTAGE | 3.3V |
MODULE CURRENT CONSUMPTION | emitting current: 107mA@22dBm receiving current: 5.3mA@125KHz |
COMMUNICATION BUS | SPI |
OPERATING TEMPERATURE | 0 ~ 50℃ |
INTERFACE | 40PIN GPIO header |
What's On Board
- SX1262
LoRa module - L76K
GNSS module - Power chip
5V to 3.3V LDO - GPS STANDY mode ON/OFF
OFF: turn off STANDY and GPS works normally
ON: turn on STANDY, GPS stops outputting NMEA - SET button
Press to wake up the GNSS module in sleep mode - LoRa module IPEX 1 connector
LoRa antenna connector - Status Indicator
PWR: power indicator
RXD/TXD: UART RX/TX indicator
PPS: GPS status indicator - Raspberry Pi 40PIN GPIO header
for connecting with Raspberry Pi series boards - LoRa module and GNSS module pin header
Package Content
Weight: 0.072 kg
- SX1262 868/915M LoRaWAN HAT x1
- 868/915M Magnetic CB antenna x1
- IPEX to SMA adapter cable ~17cm x1
- Screws pack x1
- 2×20PIN female pinheader x1