Sie haben keine Artikel im Warenkorb.
Solar Power Management Module, for 6V~24V Solar Panel
Solar Power Management Module, for 6V~24V Solar Panel
Artikelnummer:
12106
Delivery Time: ab Lager
Verfügbarkeit: Sofort-Versand ab Lager
CHF 14.90
Artikelbeschrieb
Details
Solar Power Management Module, for 6V~24V Solar Panel.
Solar Power Management Module
Compatible with 6V~24V solar panels, supports 850mAh Li batteryRecharged From Solar Panel, Or USB Power Adapter
5V/1A Or 3.3V/1A Regulated Output
Features
This solar power management module is designed for 6V~24V solar panel. It can charge the 3.7V rechargeable Li battery through solar panel or USB connection, and provides 5V/1A or 3.3V/1A regulated output.
The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep working with high-efficiency, stability, and safety. It is suited for solar powered, low-power IoT, and other environmental protection projects.
- Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel
- Supports solar panel / USB connection battery charging
- For 6V~24V solar panel, DC-002 jack input or screw terminal input
- Onboard MPPT SET switch, select the level closed to input level to improve charging efficiency
- Onboard two power output interfaces: USB port for 5V output, pinheader for 3.3V or 5V output
- Onboard high capacity aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance
- 14500 battery holder and PH2.0 battery connector, for connecting multi kinds of 3.7V rechargeable Li battery
- Several LED indicators, for monitoring the status of solar panel and battery
- Multi protection circuits: over charge / over discharge / reverse protection / over heat / over current, stable and safe to use
Specification Comparison
| SOLAR POWER MANAGER | SOLAR POWER MANAGER (B) | SOLAR POWER MANAGER (C) | |
|---|---|---|---|
| SOLAR IN | 6V ~ 24V | 6V ~ 24V (18V by default) | |
| RECHARGING | Solar panel, power adapter, USB | ||
| BATTERY | 3.7V 14500 Li-ion battery (NOT included) | 3.7V 10000mAh Li-po battery | 3x 18650 Li-ion battery (NOT included) |
| USB INPUT | 5V (Micro USB) | 5V (TYPE-C, with PD quick charge support) | |
| 5V OUTPUT | 5V / 1A (USB OUT, pin header) 3.3V / 1A (pin header) |
5V / 3A (USB-OUT, TYPE-C) | |
| RECHARGING CUTOFF VOLTAGE | 4.2V ± 1％ | ||
| OVER DISCHARGING PROTECTION VOLTAGE | 2.9V ± 1％ | 3.0V ± 1％ | |
| SOLAR PANEL RECHARGING EFFICIENCY | ~78% | ||
| USB RECHARGING EFFICIENCY | ~82% | ~93% | |
| BATTERIES BOOST OUTPUT EFFICIENCY | ~86% | ~90% | |
| QUIESCENT CURRENT (MAX) | <2mA | ||
| CASE | N/A | Metal case | |
| OPERATING TEMPERATURE | -40℃ ~ 85℃ | ||
| DIMENSIONS (MM) | 65.2 × 56.2 × 22.9 | 108.0 × 71.0 × 25.2 | 119.0 × 71.0 × 25.2 |
Supports 6V~24V Solar Panels
5-Level Voltage Switch, For Setting Solar Panel Input Voltage To Improve Efficiency
What's On Board
- Solar panel charging input:
charged by solar panel, DC-002 jack or screw terminal - USB charging input:
charged by USB connection, connect a 5V power adapter through the Micro USB port - Power output:
USB port: 5V/1A output
pinheader: 5V/1A or 3.3V/1A - Battery interfaces:
for connecting 3.7V rechargeable Li battery, PH2.0 connector or 14500 battery holder - CS8501:
USB power management chip, for USB charging and 5V/1A boost output - CN3791:
solar power management chip, for solar panel charging and buck input - Li battery protection chip:
Li battery over charge / over discharge protection
- Battery switch
- MPPTSET switch (bottom side):
supported level: 6V/9V/12V/18V/24V
select the level closed to input level to improve charging efficiency - BOOT key
- Battery capacity indicators
- USB charging indicators:
USB Charge: on when USB charging
USB Done: on when the battery is full charged by USB - Solar panel charging indicators:
Solar Charge: on when solar panel charging
Solar Done: on when the battery is full charged by solar panel
Solar Warning: on when solar panel reverse connection - Battery warning:
on when battery reverse connection - Power output indicator:
5V/1A output
Package
Weight: 0.029 kg
Note: the 14500 battery is NOT included.
- Solar Power Manager x1
