Home
Seeed Studio XIAO ESP32C3 (Pre-Soldered)

Seeed Studio XIAO ESP32C3 (Pre-Soldered)

Artikelnummer: 12672

Delivery Time: ab Lager

Verfügbarkeit: Sofort-Versand ab Lager

CHF 7.90

E-Mail an einen Freund

Artikelbeschrieb

Artikelbeschrieb

Details

This is the pre-soldered version of Seeed Studio XIAO ESP32C3, which adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivities. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios.

Feature

Flexible MCU Board: Incorporate the ESP32-C3 32-bit RISC-V chip, operating up to 160 MHz, mounted multiple development ports, supported by Arduino / CircuitPython
Outstanding RF performance: Implement complete Wi-Fi functions and Bluetooth Low Energy, while supporting communication over 100m with a U.FL antenna
Elaborate Power Design: Provide 4 working modes as low as 44 μA in deep sleep mode, while supporting lithium battery charge management
Thumb-sized Design: 21 x 17.5mm, Seeed Studio XIAO series classic form factor and elegant productization of single-sided components mounting, suitable for wearable devices
Perfect for Production: Breadboard-friendly & SMD design, no components on the back

Attention:

It will be a little hard to connect the antenna at the first time using the board.

Please connect the antenna at the vertical direction and do not drag at the horizontal direction.

Note:

XIAO SoM User Manual open-sources all hardware and software materials of XIAO, providing professional product design guidelines to help you accelerate ideas off the ground, streamline product design, providing a seamless experience from module selection to mass production. You can check here to see more info.

If you are interested in programming embedded machine learning, we have Codecraft visual programming that can help you quickly start your own TinyML project. And we have set up a #tinyml channel on our Discord server, please click to join for 24/7 making, sharing, discussing, and helping each other out.

We already have 10 XIAO products based on different solutions in the XIAO family, to help you better understand the differences and choose the most suitable part for your projects, please refer to the Seeed Studio XIAO Series Page.

Specification

Parameter	Description
Processor	ESP32-C3 SoC
Processor	RISC-V single-core 32-bit chip processor with a four-stage pipeline that operates at up to 160 MHz
Wireless	Complete 2.4GHz Wi-Fi subsystem
Wireless	Bluetooth 5.0/ Bluetooth mesh
On-chip Memory	400KB SRAM & 4MB Flash
Interface	1x UART, 1x IIC, 1x SPI,11x GPIO(PWM), 4x ADC
Interface	1x Reset button, 1x Boot button
Dimensions	21 x 17.5mm
Power	Circuit operating voltage: 3.3V@200mA
	Charging current: 350mA/100mA
	Input voltage (VIN): 5V
Deep Sleep Power Consumption	Deep Sleep Model: >44 μA
Wi-Fi Enabled Power Consumption	Active Model: <75 mA
	Modem-sleep Model: <25 mA
	Light-sleep Model: <4 mA
BLE Enabled Power Consumption	Modem-sleep Model: <27 mA
BLE Enabled Power Consumption	Light-sleep Model: <10 mA
Working Temperature	-40°C ~ 85°C