Screw Mount Breakout Card for Raspberry Pi

This card can be used both for Raspberry Pi and for the HOME Automation Card. The 2×20 pin header can be plugged into Raspberry Pi or into any stackable expansion card. It brings all 40 pins to screw-mount terminal blocks for conveniently wiring your project. Measuring only 104mm x 52mm, the card adds a prototype area with 5 x 40 PCB holes spaced at 0.1″ apart where you can install your through hole parts for your own custom project. The terminal blocks accept 26 to 18 AWG wires and are rated 6A/150V. 

Note: Raspberry Pi and IO-Plus not included. When installed on Raspberry Pi, pin 1 is opposite from the installation on the IO-Plus card.

Features

• Routes all 40 I/O and power pins to screw terminal blocks
• Permits easy and secure field installation
• Large prototype area for custom projects
• 2.54mm Pitch PCB screw Terminal Block Connectors
• Rated voltage: 300V
• Rated current: 10A
• Withstanding voltage: AC 1500V/1Min
• Wire range: 24 - 12 AWG