RP2350 7″ LCD Development Board

The RP2350 7″ LCD Development Board is a highly integrated microcontroller development platform based on the Raspberry Pi RP2350B chip. It combines a 7-inch RGB LCD display, onboard memory, and multiple peripheral interfaces into a single board for embedded development, user interface design, and control applications.

The board features a dual-core, dual-architecture RP2350B microcontroller, allowing developers to select between Arm Cortex-M33 cores or Hazard3 RISC-V cores. It includes 16MB onboard Flash and 2MB PSRAM, supporting complex graphical interfaces and data handling tasks.

A 7-inch IPS LCD with a resolution of 800×480 and 65K color depth is integrated directly on the board. An optional version adds a 5-point capacitive touch panel connected via I2C with interrupt support. The display offers wide viewing angles and is suitable for human–machine interfaces.

The board provides a wide range of expansion and communication interfaces, including USB device/host support, CAN, RS485, UART, I2C, sensor headers, and a TF card slot. Power and programming are handled through a USB Type-C port, and a lithium battery connector with charge management is included.

The RP2350 7″ LCD Development Board supports development using C/C++, MicroPython, and the Arduino IDE, and is suitable for prototyping, education, and embedded product development.

Key Features

• RP2350B microcontroller designed by Raspberry Pi

• Dual-core, dual-architecture design

  • Dual Arm Cortex-M33 or dual Hazard3 RISC-V cores

  • Clock speed up to 150 MHz

• 520KB on-chip SRAM

• 16MB onboard Flash memory

• 2MB onboard PSRAM

• Integrated 7″ IPS LCD display

  • Resolution: 800 × 480

  • Color depth: 65K

  • Viewing angle: approx. 170°

• Optional 5-point capacitive touch panel (touch version only)

• USB 1.1 device and host support

• USB Type-C port for power, programming, and data

• Drag-and-drop programming via USB mass storage

• 12 programmable I/O (PIO) state machines

• Built-in temperature sensor

• Low-power sleep and dormant modes

• Accurate onboard clock and timers

Package Content

Weight: 0.282 kg

1. RP2350-Touch-LCD-7 x1
2. HY2.0 2PIN to 2PIN male cable ~10cm ×2
3. HY2.0 3PIN to 3PIN male cable ~10cm ×1
4. HY2.0 4PIN to 4PIN male cable ~10cm ×2
5. Screws pack x1