Mini-Computer Advanced Version for RPi Compute Module 4
Delivery Time: ab Lager
Verfügbarkeit: Sofort-Versand ab Lager
Waveshare CM4-IO-BASE-C (Advanced Ver.) Inside, Fast And Easy To Build A Mini-Computer
Version
In addition to the CM4-IO-BASE-C Base Board, it is equipped with Aluminum Alloy case, power supply and fan, etc.
Dedicated 40PIN LCD Connector
One Connection For Display And Touch, Support 70H-1024600-IPS-A Series Display
Specifications
CM4 SOCKET | suitable for all variants of Compute Module 4 |
---|---|
NETWORKING | Gigabit Ethernet RJ45 connector |
CONNECTOR | M.2 M KEY, supports communication modules or NVME Solid State Drives |
Raspberry Pi 40PIN GPIO header | |
USB | USB 2.0 Type A × 2 |
DISPLAY | LCD port (40pin 0.5mm FPC connector) |
CAMERA | MIPI CSI-2 camera port × 2 (15pin 1.0mm FPC connector) |
VIDEO | HDMI port, supports 4K 30fps output |
RTC | Real-time clock with battery socket and ability to wake Compute Module 4 |
STORAGE | TF card socket for Compute Module 4 Lite (without eMMC) variants |
FAN HEADER | allows speed adjustment, 5V |
POWER INPUT | 5V |
DIMENSIONS | 85 × 56mm |
Same Direction Interfaces
The Connection Cables Are In The Same Direction, Neat And Convenient
Precise Cut-Out With Clear Label
Each Cut-Out Is Completely Aligned With The Connector
Cooling Fan Included
Comes With Cooling Fan, Combined With The Airflow Vent, Better Heat Dissipation
Industrial Rail-Mount Design
Suitable For Scenarios That Require Rail Mounting, More Stable Installation
Wall Mount Support
Wall Mount Holes On Two Sides, Handy For Mounting
Application Example
Suitable For Binocular Vision Raspberry Pi Projects
What's On Board
- CM4 socket
suitable for all variants of Compute Module 4 - Power input/Programming
5V/2.5A power supply, or used for eMMC burning - LCD Port
40PIN LCD display port, for direct connection to 70H-1024600 series display - FAN
for connecting cooling fan, allows speed adjustment via IO ports - CAM
2x MIPI CSI camera ports - HDMI0 connector
HDMI0 port, supports 4K 30fps output - USB 2.0 ports
2x USB 2.0 ports, for connecting sorts of USB devices - Gigabit Ethernet connector
Gigabit Ethernet RJ45 connector, with 10 / 100 / 1000M network support - M.2 indicator
indicating the operating status of M.2 interface - Raspberry Pi indicators
Green LED: PWR, indicating the status of Raspberry Pi power supply
Red LED: ACT, indicating the operating status of Raspberry Pi
- Boot switch
ON: CM4 would be booted from USB-C interface
OFF:CM4 would be booted from eMMC or TF card - 40PIN GPIO header
for connecting sorts of HAT - TF card slot
for connecting a TF card with pre-burnt image (Lite variant ONLY) - FE1.1S
USB HUB chip, support expanding USB port - M.2 slot
supports sorts of NVME Solid State Drives, or communication modules with PCIE M.2 KEY-M interface - RTC chip
allows RTC-related functions like wakeup, shutdown, reboot, and more - RTC interrupt selection
GN-EN: CM4 shutdown(by default) on RTC interruption
PI-RUN: CM4 reboot on RTC interruption
D4: D4 pin is triggered on RTC interruption - RTC battery holder
supports CR1220 button cell
Whats included
- CM4-IO-BASE-BOX-C x1
- Metal case (top and bottom) x1
- Fan-4010-PWM-5V x1
- Antenna connector rubber plug x1
- Rail-mount buckle x1
- EU 5V 3A Type-C Power supply x1
- Screws pack x1