Industrial Grade Isolated USB Converter to RS232/485/422/TTL
Delivery Time: ab Lager
Verfügbarkeit: Sofort-Versand ab Lager
USB TO RS232/485/422/TTL
Original FT232RNL | Stable Transmission | Multiple Devices Applicable | Multi-OS Compatible
Features
- Adopt original FT232RNL chip, fast communicating, stable and reliable, better compatibility
- Supports multiple communication interface conversion: USB to RS232, USB to RS485, USB to RS422, USB to TTL
- Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
- Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
- Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & ESD protection
- Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance
- Fully automatic transceiver circuit with no delay, ensures the USB port communicates with different interfaces fastly and stably, without interfering with each other
- Onboard TTL serial 3.3V/5V voltage translator, config the TTL level via switch
- 3 LEDs for indicating the power and transceiver status
- High quality USB-B and RS232 connectors, smoothly plug/pull
- Industrial grade metal case, supports wall-mount and rail-mount installations, solid and beautiful, easy to install
Specifications
PRODUCT TYPE | Industrial grade digital isolated converter | |
---|---|---|
USB | Operating voltage | 5V |
Connector | USB-B | |
Protection | 200mA self-recovery fuse, isolated output | |
RS232 | Connector | DB9 male |
Protection | TVS diode, surge protection & ESD protection | |
Transmission mode | Point-to-point | |
Baud rate | 300bps ~ 3Mbps | |
RS485/422 | Connector | Screw terminal |
Direction control | Hardware automatic control | |
Protection | 600W lightningproof and surge-suppress, 15KV ESD protection (reserved two 120R balancing resistors, enabled/disabled via jumper) | |
Transmission mode | Point-to-multipoints (485 mode: up to 32 nodes, it is recommended to use repeaters for 16 nodes or more; 422 mode: up to 256 nodes, it is recommended to use repeaters for 16 nodes or more) | |
Baud rate | 300bps ~ 3Mbps | |
TTL (UART) | Operating voltage | 3.3V / 5V |
Connector | Screw terminal | |
Pins | TXD, RXD, GND, 5V/3.3V | |
Protection | clamp protection diode, over-voltage/negative-voltage proof, shock resistance | |
Transmission mode | Point-to-point | |
Baud rate | 300 bps ~ 3Mbps | |
INDICATORS | PWR | Red power indicator, light up when there is USB connection and voltage is detected |
TXD | TX indicator, light up when the USB port sends data | |
RXD | RX indicator, light up when the device ports send data back | |
OPERATING ENVIRONMENT | Temperature | -15℃ ~ 70℃ |
Humidity | 5%RH ~ 95%RH | |
OPERATING SYSTEM | Mac, Linux, Android, Windows 11 / 10 / 8.1 / 8 / 7 |
Original Industrial Grade Chip
Onboard Original FT232RNL Chip,
Safer Isolated Design
- Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
- Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
Multiple Protection, Safe And Stable
Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & ESD protection. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance.
Multi System Support
Supports Mac, Linux, Android, Windows 11 / 10 / 8.1 / 8 / 7, Etc.
Aluminium Alloy Enclosure
Aluminium Alloy Enclosure With Sand Blasting And Anodic Oxidation
Solid And Durable, Fashionable And Good Hand Feeling
Wall-Mount And Rail-Mount Support, More Flexible For Industrial Installation
Package content
Weight: 0.104 kg
- USB TO RS232/485/422/TTL x1
- Rail-mount buckle x1
- USB type A to type B cable ~1.2m x1
- Screwdriver x1