Sie haben keine Artikel im Warenkorb.
HiFiBerry DAC2 HD
HiFiBerry DAC2 HD
Artikelnummer:
11230
Delivery Time: ab Lager
Verfügbarkeit: Sofort-Versand ab Lager
CHF 119.90
Artikelbeschrieb
Details
This is our high-end DAC for the Raspberry Pi. It can be simply plugged onto your Raspberry Pi, without any soldering. It can be extended by an additional DSP module.
Features
- Stereo output
- Dedicated 192kHz/24bit high-quality Burr-Brown DAC
- Custom current-to-voltage output stage with high-end filtering
- Four ultra-low-noise linear voltage regulators for optimal audio performance
- Low-jitter clock for optimised clock performance (independent from Raspberry Pi clock sources)
- Hardware volume control for DAC. You can control the output volume using “alsamixer” or any application that supports ALSA mixer controls.
- Supports HiFiBerry DSP add-on module
- Connects directly to the Raspberry Pi, no additional cables needed
- No soldering, comes as a pre-fabricated kit. You just plug it onto the Raspberry Pi, it is conform to the Raspberry Pi hardware-attached-on-top (HAT) specification.
- Compatible with all Raspberry Pi models with a 40-pin GPIO connector
- Directly powered from the Raspberry Pi, no additional power supply required
- HAT compliant, EEPROM for automatic configuration
- Gold plated RCA output connectors
- Comes with all components required to mount it. We include 4 M2.5x12mm spacers to fix the board onto the Raspberry Pi
- Requires at least Linux kernel 4.19.97
Specifications
Maximum output voltage | 2.1Vrms | |
DAC signal-to-noise ratio | 123db | typical |
DAC THD+N | -108db | typical, 44.1kHz, -10dBFS |
Frequency response | 10Hz-70kHz | -3dB |
Power consumption | <1W | |
Sample rates | 44.1-192kHz | |
Bits/sample | 16, 32 |
.