Sie haben keine Artikel im Warenkorb.
Gigabit/2.5G Dual Ethernet Industrial Computer Based On Raspberry Pi CM5 B
Dual-Ethernet-Ports (2 × RS485 + 2 × RS232)
- Equipped with dual Ethernet ports, including a 1000M and a 2500M RJ45, for robust networking capabilities.
- Features an M.2 slot supporting NVMe SSDs for enhanced storage performance and 4G/5G module compatibility.
Artikelnummer:
13079
Verfügbarkeit: Zur Zeit nicht an Lager
CHF 85.90
Artikelbeschrieb
Details
Dual Ethernet Industrial Computer based on Raspberry Pi CM5
- Designed for Raspberry Pi Compute Module 5
Specifications
| CM5 socket | Suitable for all variants of Compute Module 5 |
|---|---|
| Networking | 1000M Ethernet RJ45 port × 1 2500M Ethernet RJ45 port × 1 |
| USB | USB 3.2 Gen1 port × 1 |
| USB 2.0 port × 3 | |
| Video | HDMI interface × 1, supports dual 4K display outputs |
| M.2 | M.2 M KEY (PCIe Gen2/3 × 1, 2230 / 2242) |
| M.2 B KEY, supports connecting 4G / 5G communication module | |
| Storage | TF card socket for Compute Module 5 Lite (without eMMC) variants |
| Serial Interface | Options for 2 × RS485 + 2 × RS232 version or 4 × RS485 version |
| 1 × CAN with up to 1Mbps communication rate | |
| Digital Input/Output | 2 × digital outputs + 2 × digital inputs |
| Audio | 3.5mm jack (microphone support), PH2.0 speaker header |
| Fan header | 5V, 4PIN JST-SH PWM fan header |
| Buzzer | 1-ch controllable buzzer |
| Other | Onboard EEPROM and encryption chip |
| Power Input | 7V ~ 36V wide voltage range screw terminal, 5V 5A Type-C port |
| Dimensions | 136.00 × 92.00 × 39.50 (mm) |
What's the differences
| CM5 Base Board | Interface count and specifications | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PoE | Gigabit ETH | 40PIN GPIO | PCIe | USB① | MIPI | HDMI | RTC | Fan Header② | Power Input | Features | ||
 NANO A |
√ | 3.0×1 | ×2 | SH1.0 | √ | 5V | CM5 sized | |||||
 NANO B |
×1 | √ | 16PIN PCIe | 3.0×1 | ×2 | √ | SH1.0 | √ | 5V | CM5 sized | ||
 mini Base A |
×1 | √ | 16PIN PCIe | 3.0×2 2.0×2 |
×2 | ×2 | ML/CR1220 | √ | 5V | mini size | ||
 mini Base B |
×1 | √ | M.2 M KEY | 3.0×2 2.0×2 |
×2 | ×2 | ML/CR1220 | √ | 5V | mini size, onboard EEPROM and encryption chip | ||
 Mini Dual Gigabit |
×2 | √ | 3.0×1 | SH1.0 | √ | 5V | dual ETH | |||||
 Dual ETH |
1G ×1 2.5G ×1 |
√ | M.2 M KEY | 3.0×1 2.0×2 |
×2 | ×2 | ML/CR1220 | √ | 7V~36V | dual ETH, onboard EEPROM and Encryption chip | ||
 Dual ETH 4G/5G |
1G ×1 2.5G ×1 |
√ | M.2 M KEY | 3.0×2 | ×2 | ×2 | ML/CR1220 | √ | 7V~36V | dual ETH and 4G/5G support | ||
 PoE Base |
√ | ×1 | √ | M.2 M KEY | 3.0×2 2.0×2 |
×2 | ×2 | ML/CR1220 | √ | 5V | USB×4 | |
 Raspberry Pi official |
③ | ×1 | √ | M.2 M KEY | 3.0×2 | ×2 | ×2 | ML/CR1220 | √ | 5V | Official IO base board | |
 IPCBOX-CM5 |
1G ×1 2.5G ×1 |
M.2 M KEY | 3.0×1 2.0×3 |
×1 | SH1.0 | √ | 7V~36V | dual ETH 4G/5G support RS485/RS232 Encryption chip EEPROM CAN digital inputs digital outputs audio buzzer |
||||
| Note | ① USB 3.0 is equivalent to USB 3.2 Gen1. ② Unless otherwise specified, the Fan header usually is JST-SH type connector. ③ There's PoE header only on the Raspberry Pi official IO board without PoE circuit, which means additional PoE module is required for the official IO board to enable PoE feature. Unless otherwise specified, the PoE feature here stands for integrating 802.3af-compliant PoE circuit (5V/2.5A). |
|||||||||||
Connecting with Compute Module 5
standard CM5 socket suitable for Compute Module 5 Lite / eMMC series module
* for reference only, please refer to the package content for detailed part list
4G / 5G module compatibility
compatible with communication modules with M.2 B KEY interface
* An additional communication module is required to enable 5G/4G/3G/2G cellular network function, recommended: SIM7600G-H-M.2, SIM8260G-M2, and SIM8262E-M2.
Supports connecting to M.2 NVMe Drive
Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, Supports booting Pi5 from NVME Solid State Drive
* for reference only, please refer to the package content for detailed part list
Applicable M.2 drive sizes
NVMe Drive Slot Support
* Only supports the NVMe Protocol Solid State Drives
Precise cut-out with clear label
each cut-out is completely aligned with the connector
Heat Dissipation Design
Aluminum alloy case enables large-area heat conduction and dissipation, combined with heat sink fins, better heat dissipation
Rail-mount buckle support
Reserved Rail-mount buckle mounting holes on the Back for Rail-mount Installation, more convenient installation
*for reference only, the rail-mount buckle is included and is compatible
with VESA mounting.
What's On Board
- CM5 socket
suitable for all variants of Compute Module 5 - M.2 M KEY
supports 2242 / 2230 NVMe Solid State Drives or AI modules - Nano SIM card slot
- TF card slot
for connecting a TF card with pre-burnt system (Lite variant ONLY) - Dual USB 2.0 ports
standard USB 2.0 ports - BOOT button
press before powering on to enter the burning mode - PSW power button
Long press to force power off, short press to soft power off or on - M.2 B KEY
supports connecting 4G/5G communication module - Buzzer
- PH2.0 speaker header
supports connecting to 8Ω 5W speaker - Programming
used for eMMC burning - 3.5mm Jack
supports audio input and output
- HDMI interface
supports 4K outputs - USB ports
1 × standard USB 2.0 port, 1 × USB 3.2 Gen1 Type-A port with up to 5Gbps - DC power connector
supports DC 7V ~ 36V power supply - Indicators
- 1000M Ethernet RJ45 port
supports 10M / 100M / 1000M network connections - 2500M Ethernet RJ45 port
supports 10M / 100M / 1000M / 2500M network connections - RTC Batt header
connect the RTC Batt to power the RTC - Multi-function interface
1 × CAN interface with up to 1Mbps and 2 × digital outputs + 2 × digital inputs - RS485 / RS232 interface
select interface based on version - 120R Jumper
RS485 CAN termination resistor jumper, RS232 N/A
Application Example
Suitable for Raspberry Pi applications in remote communication or other industrial situations
* for reference only, the display, keyboard, and mouse are NOT included, please purchase separately if needed
Package Content
Weight: 0.697 kg
- IPCBOX-CM5-B x1
- CM5-IPC-BASE-A-2RS485 board x1
- OPTIONS 12V 4A power x1
- Power adapter cable 15cm x1
- Black nylon spacers x4
- Screws pack x1
- Screwdriver x1
- 6PIN 3.5mm pitch double-layer screw terminal x1
- 4PIN 3.5mm pitch double-layer screw terminal x1
- Rail-mount buckle x1
- Pink thermal tapes x1
