Sie haben keine Artikel im Warenkorb.
EDATEC PAC3020, Real-time CODESYS Programmable Automation Controller
- Experience seamless real-time control and visualization with support for multiple PLCopen languages and advanced motion control capabilities.
- Equipped with a powerful quad-core processor, dual-band Wi-Fi, and extensive connectivity options, this controller is optimized for demanding industrial applications.
Artikelnummer:
12976
Verfügbarkeit: Zur Zeit nicht an Lager
CHF 343.95
Downloads & Links
Handbücher
Artikelbeschrieb
Details
eal-time CODESYS Programmable Automation Controller
|
Specifications
| Hardware System | |
|---|---|
| CPU | Broadcom BCM2712 quad-core Arm Cortex-A76 64-bit @2.4GHz |
| VPU | 4Kp60 HEVC decoder |
| GPU | OpenGL ES 3.1 & Vulkan 1.2 |
| Memory | Options for 2GB, 8GB LPDDR4-4267 SDRAM |
| Storage | 1 x M.2 B-Key interface (for 2230/2242 SSD storage expansion, optional 128GB/256GB supported) |
| CODESYS | |
|---|---|
| Runtime | Multicore CODESYS Control Runtime System |
| Programming Mode | IEC 61131-3 programming languages, including ST, LD, FBD, SFC and CFC |
| IDE | CODESYS V3.5 |
| Fieldbus | EtherCAT Master, Modbus TCP Master, CANopen Manager, Modbus Serial Master and PROFINET Controller |
| Motion Control | Optional CODESYS SoftMotion and CNC+Robotics |
| Visualization | Optional CODESYS TargetVisu and CODESYS WebVisu |
| OPC UA | Support OPC UA Server |
| Software | |
|---|---|
| Operating System | Raspberry Pi OS (Desktop) 64-bit Raspberry Pi OS (Lite) 64-bit |
| Front I/O | |
|---|---|
| Audio OUT | 1 x Audio Output (HPO), 3.5mm audio jack connector (green), stereo audio output. |
| Audio IN | 1 x Audio Input (LINE IN), 3.5mm audio jack connector (red), supporting stereo audio input. |
| RS485 | 1 x RS485 port, 3-Pin 3.5mm pitch phoenix terminals with 120R terminal resistor. The signal is defined as GND/A/B. |
| RS232 | 1 x RS232 port, 3-Pin 3.5mm pitch phoenix terminals, the signal is defined RS232 as GND/TX/RX. |
| USB 2.0 | 2 x USB 2.0 ports, dual layer Type-A connector, each channel supports up to 480Mbps. |
| USB 3.0 | 2 x USB 3.0 ports, dual layer Type-A connector, each channel supports up to 5Gbps. |
| 1000M Ethernet | 1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network, supporting PoE. |
| Rear I/O | |
|---|---|
| SD Card Slot | 1 x Micro SD card slot, which is used to install Micro SD card. It supports booting the OS from SD card. |
| Side I/O | |
|---|---|
| HDMI*1 | 2 x HDMI ports, Micro HDMI connector, supporting 4K 60Hz |
| Power | 1 x power in port, USB Type-C connector, supporting 5V/5A DC power input. |
| *1: Some Micro HDMI cables have shorter Micro HDMI connectors, which may result in abnormal HDMI connections, so it is recommended to use Raspberry Pi's official Micro HDMI to standard HDMI cable, which can be purchased in the “Optional Accessory” section. | |
| Buttons and Indicators | |
|---|---|
| ON/OFF | 1 x power button, which is used to turn on and turn off the device. |
| PWR | 1 x red power indicator, using to check the status of device power-on and power-off. |
| ACT | 1 x green system indicator, using to check the working status of device. |
| COM1~COM2 | 2 x green UART indicators, which is used to check the communication status of UART port. |
| Expansion Functions | |
|---|---|
| RTC | RTC with 1F SuperCAP backup, which can ensure that the system clock is not affected by device power-off. We also provide a battery base, and you can buy a CR1220 battery backup for RTC. |
| Buzzer | A tip or an abnormity can be configurated according to actual application, which realizes the alarm function. |
| Electrical Characteristics | |
|---|---|
| Input Voltage | 5V DC |
| Power Consumption | 25W (Max) |
| Mechanical Characteristics | |
|---|---|
| Dimensions | 102.8mm x 89.5mm x 32.5mm (WxDxH) |
| Weight | 300g |
| Installation | Placing on the desk and wall mounting |
| Wireless | |
|---|---|
| Wi-Fi | Dual-band 802.11ac Wi-Fi |
| Bluetooth | Bluetooth 5.0 / Bluetooth Low Energy (BLE) |
| Environmental & Regulatory | |
|---|---|
| Operating Temperature | -25°C ~ 60°C |
| Storage Temperature | -25°C ~ 60°C |
| Ambient humidity | 5% ~ 95% (non-condensing) |
