Sie haben keine Artikel im Warenkorb.
EDATEC Industrial Computer IPC3632 8GB Ram, 32GB SD, 4EU, With Super Capacitor Module - CM5 based
- Powered by a quad-core Arm Cortex-A76 processor, this industrial computer offers robust performance with 8GB RAM and 32GB eMMC storage, expandable via Micro SD and M.2 NVMe SSD.
- Equipped with dual Ethernet ports, multiple isolated RS232/RS485 and CAN interfaces, and comprehensive wireless connectivity options, it ensures seamless integration and communication in diverse industrial environments.
Artikelnummer:
12993
Verfügbarkeit: Zur Zeit nicht an Lager
CHF 447.50
Downloads & Links
Handbücher
Artikelbeschrieb
Details
Industrial Computer Based on Raspberry Pi CM5
|
Specifications
| System | |
|---|---|
| CPU | Broadcom BCM2712, quad core Arm Cortex-A76 (ARM v8) 64-bit SoC @ 2.4GHz |
| VPU | H.265 (HEVC), up to 4Kp60 decode |
| GPU | OpenGL ES 3.1 & Vulkan 1.2 |
| Memory | 8GB LPDDR4-4267 SDRAM |
| Storage | 32GB eMMC storage Micro SD card (user storage expansion) M.2 NVMe SSD (options for 128GB, 256GB, 512GB) |
| Software | |
|---|---|
| Operating System | Raspberry Pi OS (Desktop) 64-bit Raspberry Pi OS (Lite) 64-bit |
| Front I/O | |
|---|---|
| Power | 1 x DC IN, 2-Pin 3.5mm pitch phoenix terminals with screw holes. It supports 9V~36V input, the signal is defined as VIN+/GND. |
| RS485/232 | 12-Pin 3.5mm pitch phoenix terminals with IO isolator, which are equipped with electrostatic and surge protection. Different numbers of RS232 and RS485 ports can be selected according to actual application. The signal of RS485 is defined as IGND/A/B, and the signal of RS232 is defined as IGND/TX/RX.
|
| 1000M Ethernet | 1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network. |
| 100M Ethernet | 1 x adaptive 10/100M ethernet port, RJ45 connector. It can be used to access the network. |
| CAN | 2 x CAN ports, 6-Pin 3.5mm pitch phoenix terminals
|
| DI | 8 x DI ports, 10-Pin 3.5mm pitch phoenix terminals
|
| DO | 8 x DO ports, 10-Pin 3.5mm pitch phoenix terminals
|
| Rear I/O | |
|---|---|
| SD Card Slot | 1 x Micro SD card slot, which is used to install Micro SD card for storing user data. |
| SIM Card Slot | 1 x Nano SIM card slot, which is used to install Nano SIM card for getting 4G signal. |
| Micro USB | 1 x Micro USB port, which supports to flash to eMMC for the system. |
| Side I/O | |
|---|---|
| HDMI | 1 x HDMI port, Type-A connector. It is compatible with HDMI 2.0 standard and supports 4K 60Hz. |
| USB 2.0 | 2 x USB 2.0 ports, Type-A connector, supporting up to 480Mbps transmission rate. |
| Antenna | 2 x SMA ports (optional), using to connect 4G antenna and Wi-Fi/BT antenna. |
| Buttons and Indicators | |
|---|---|
| Reset | 1 x Reset button, which can reset the device. |
| PWR | 1 x red power indicator, which is used to check the status of device power-on and power-off. |
| 4G | 1 x green 4G indicator, which is used to check the status of 4G signal. |
| ACT | 1 x green system indicator, which is used to check the working status of device. |
| USER | 1 x green user indicator, user can customize a status according to actual application. |
| COM1~COM4 | 4 x green UART indicators, using to check the communication status of UART ports. |
| CANB0~CANB1 | 2 x green CAN indicators, using to check the communication status of CAN ports. |
| X0~X7 | 8 x green DI indicators, using to check the input status of DI ports. |
| Y0~Y7 | 4 x green DO indicators, using to check the output status of DO ports. |
| Internal I/O | |
|---|---|
| M.2 B | 1 x M.2 B, M.2 B Key connector, supporting to connect SSD. It is compatible with M.2 B 2230 and M.2 B 2242 SSD. |
| Expansion Functions | |
|---|---|
| EEPROM | Supports 4K byte storage and improves the ease of use of device. |
| Encryption chip | It can be matched to realize the required upper layer application and improves the security of device. |
| RTC | RTC with 1F SuperCAP backup, which can ensure that the system clock is not affected by device power-off. We also provide a battery base, and you can buy a CR1220 battery backup for RTC. |
| Buzzer | A tip or an abnormity can be configurated according to actual application, which realizes the alarm function. |
| Watch Dog* | This function has been reserved on hardware. But we need additional software to support it, which is under development. |
| Electrical Characteristics | |
|---|---|
| Input Voltage | 9V ~ 36V DC |
| Power Consumption | 24W (Max) |
| Mechanical Characteristics | |
|---|---|
| Dimensions | 143mm x 100mm x 55mm (WxDxH, DIN-rail and antenna are not included.) |
| Weight | 1kg |
| Installation | DIN-rail mounting |
| Wireless | |
|---|---|
| Wi-Fi/Bluetooth (optional) | 2.4GHz & 5GHz dual-band Wi-Fi and Bluetooth 5.0 with antenna
|
| 4G | Connect with various 4G LTE modules through the Mini PCIe interface, with antenna.
|
| Environmental & Regulatory | |
|---|---|
| Operating Temperature | -25°C ~ 60°C |
| Storage Temperature | -25°C ~ 60°C |
| Ambient humidity | 5% ~ 95% (non-condensing) |
