EDATEC IPC1220 Industrial Computer, wireless, 512MB RAM, 8GB eMMC, 4G(EU) Module - based on CM0

The ED-IPC1220 is an industrial-grade computer based on the Raspberry Pi Compute Module CM0, featuring a 1GHz quad-core 64-bit Arm Cortex-A53 processor, 512MB SDRAM, and optional 8GB or 16GB eMMC flash storage. For multimedia processing, it supports H.264/MPEG-4 video encoding and decoding at 1080p@30fps, while being fully compatible with OpenGL ES 1.1/2.0 graphics processing standards to meet industrial visualization needs.In terms of industrial interface configuration, the device offers rich I/O interfaces on the front panel, including one RS485 serial port, 8 digital inputs (DI) and 8 digital outputs (DO) with 3.75KV isolation protection, 2 voltage analog inputs (ADV, 0-10V) and 2 current analog inputs (ADA, 0-20mA) with 12-bit resolution and 3KHz sampling rate, as well as one 10M/100M adaptive Ethernet interface. The rear panel features a Nano SIM card slot (for 4G functionality) and one Type-C USB interface (supporting eMMC flashing). The side panel includes one USB 2.0 Type-A interface, one RS485, one RS232, a power interface (supporting 9V-28V wide voltage input), and two optional SMA antenna connectors (for 4G and Wi-Fi/BT).For wireless communication, the ED-IPC1220 provides flexible optional configurations: 2.4GHz Wi-Fi + Bluetooth 5.0 dual-mode modules, as well as region-specific 4G CAT1 modules. A built-in RTC (Real-Time Clock) with a 1F supercapacitor backup.Mechanically engineered for industrial environments, the product boasts a compact metal enclosure with a net weight of approximately 435g, supporting standard DIN rail mounting for easy deployment. It maintains reliable operation within a wide temperature range of -20°C to 60°C, making it ideal for industrial automation, IoT data acquisition, and edge computing.

System

• CPU: 1GHz quad-core 64-bit Arm Cortex-A53 processor
• VPU: H.264/MPEG-4 video decoding, 1080p@30fps
• H.264 encoding, 1080p@30fps
• GPU: OpenGL ES 1.1/2.0 graphics processing
• Memory: 512MB SDRAM
• Storage: 8GB or 16GB eMMc storage available

Software

Operating System:    Raspberry Pi OS (Desktop) 64-bit

Raspberry Pi OS (Lite) 64-bit

Raspberry Pi OS (Desktop) 32-bit

Raspberry Pi OS (Lite) 32-bit

Front I/O

RS485 Port: 1x RS485, 3-Pin 3.5mm Pitch Phoenix Terminal, Signal Definition: GND/A1/B1

DI Port: 8 x DI, 2 x 5-Pin 3.5mm Pitch Phoenix Terminals

• Sensor Type: Wet Contact (NPN)
• Isolation Protection: 3.75kV
• 4 DI share 1 common terminal COM: DI0~DI3 share common terminal COMA, DI4~DI7 share common terminal COMC.
• DI to COM:
  ON State: 5~30 VDC or -30~-5 VDC
  OFF State: 0~2 VDC or -2~0 VDC

DO Port: 8 x DO, 2 x 5-Pin 3.5mm Pitch Phoenix Terminals

• Sensor Type: Sink Type (NPN)
• Sensor Type: NPN
• Isolation Protection: 3.75kV
• Output: 5~36 VDC (24 VDC is recommended), maximum current is 0.2A (per channel)
• 4 DO share 1 common terminal COM: DO0~DO3 share common terminal COMB, DO4~DO7 share common terminal COMD

ADV Port: 2 x Analog voltage inputs, 3-Pin 3.5mm pitch phoenix terminal

• Signal Type: Voltage input (differential)
• Input Voltage range: 0-10V
• Input Impedance: 10MΩ
• Resolution: 12-bit
• Accuracy: ±0.1% of full scale at 25°C; ±0.3% of full scale from -20°C to 60°C
• Sampling Rate: 3kHz

ADA Port: 2 x Analog current inputs, 3-Pin 3.5mm pitch phoenix terminal

• Signal Type: current input (differential)
• Input Current Range: 0-20mA
• Sample resistor for Current：120Ω
• Input Impedance: 10MΩ
• Resolution: 12-bit
• Accuracy: ±0.1% of full scale at 25°C; ±0.3% of full scale from -20°C to 60°C
• Sampling Rate: 3kHz

100M Ethernet port: 1 x adaptive 10M/100M ethernet port, RJ45 connector. It can be used to access the network

Rear I/O

Nano SIM Card Slot: 1 x Nano SIM card slot for installing a Nano SIM card to obtain 4G signal.
Note: If the 4G function is not selected as an option, the Nano SIM card slot will not function

Type-C USB Port: 1 x Type-C USB Port, supports eMMC flashing via this port

Side Panel I/O

USB 2.0 Port: 1 x USB 2.0, Type-A Connector, supports up to 480Mbps transfer rate

RS485 Port: 1 x RS485 Port, 3-Pin 3.5mm Pitch Phoenix Terminal, Signal Definition: GND/A2/B2

RS232 Port: 1 x RS232 Port, 3-Pin 3.5mm Pitch Phoenix Terminal, Signal Definition: GND/TX3/RX3

Antenna Port (optional): 2 x SMA Connectors, for connecting 4G and Wi-Fi/BT antennas

Power Port: 1 x DC Input, 2-Pin 3.5mm Pitch Phoenix Terminal with Screw Holes; Supports 9V~28V Input, Signal Definition: VIN+/GND

Button

RESET Button: 1 x Reset Button, hidden button, press to reboot the device

USER Button: 1 x User Button, hidden button, user can define actions as needed

Indicator

PWR: 1 x Power Indicator, Red, shows device power status
ACT: 1 x System Status Indicator, Green, shows device working status
4GR: 1 x 4G Registration Indicator, Red/Green Dual-color, shows 4G module registration status
4GS: 1 x 4G Signal Indicator, Red/Green Dual-color, shows 4G signal status
USER: 1 x User Indicator, Green, user can define status as needed
COM1-COM3: 3 x Serial Port Indicators, Green, show serial port communication status
DI0-DI3: 8 x DI Indicators, Green, show DI port input status

DO0-DO3: 8 x DO Indicators, Green, show DO port output status

Expansion Funtions

RTC: Built-in RTC function with a 1F supercapacitor as the RTC backup power supply

Electrical Characteristics

• Input Voltage: 9V~28V DC
• Power Consumption: About 5W

Mechanical Characteristics

• Dimensions: 105mm x 86mm x 26mm (W x D x H, DIN-rail bracket and antenna are not included)
• Weight: About 435g
• Installation: DIN rail mounting

Wireless

Wii-Fi/Bluetooth (Optional): Supports 2.4GHz Wi-Fi and Bluetooth, with antenna

• 2.4GHz Wi-Fi: Compliant with IEEE 802.11 b/g/n
• Bluetooth 5.0: Compatible band 2402MHz ~ 2480MHz

4G (Optional): Connects to various 4G modules via connector, with antenn

• EC800M-CN Module (China)
• • LTE FDD: B1/B3/B5/B8
  • LTE TDD: B34/B38/B39/B40/B41
• EC800K-EU Module (Europe)
• • LTE-FDD: B1/B3/B5/B7/B8/B20/B28
• EC800Q-NA Module (America)
• • LTE-FDD: B2/B4/B5/B12/B13/B66

Environmental & Refulatory

• Operating Temperature: -20°C ~ 60°C
• Storage Temperature: -20°C ~ 60°C
• Ambient humidity: 5% ~ 95% (non-condensing)