Sie haben keine Artikel im Warenkorb.
EDATEC HMI3630, 13.3" Industrial Touch Panel Computer, 8GB LPDDR4 RAM, 32GB eMMC
- Experience seamless performance with a 13.3-inch full HD capacitive touch screen, powered by a quad-core Cortex-A76 processor and 8GB RAM.
- Enjoy versatile connectivity options including HDMI, LAN, USB, and multiple isolated ports, all within a robust design supporting wide voltage input and advanced protection features.
Artikelnummer:
12989
Verfügbarkeit: Zur Zeit nicht an Lager
CHF 554.90
Downloads & Links
Handbücher
Artikelbeschrieb
Details
13.3-inch Industrial HMI Based on Raspberry Pi CM5
|
Specifications
| System | |
|---|---|
| CPU | Broadcom BCM2712, quad core Cortex-A76 (ARM v8) 64-bit SoC @ 2.4GHz |
| VPU | H.265 (HEVC), up to 4Kp60 decode |
| GPU | OpenGL ES 3.1 & Vulkan 1.2 |
| Memory | 8GB LPDDR4-4267 SDRAM |
| Storage | 32GB eMMC storage 1 x Micro SD card Slot (user storage expansion) 1 x M.2 B port (for M.2 B 2230/2242 SSD storage expansion, options for 128GB, 256GB, 512GB) |
| Software | |
|---|---|
| Operating System | Raspberry Pi OS (Desktop) 64-bit Raspberry Pi OS (Lite) 64-bit |
| Side I/O | |
|---|---|
| Power | 1 x DC IN, 2-Pin 3.5mm pitch phoenix terminals with screw holes. It supports 12V~24V input, the signal is defined as VIN+/GND. |
| RS485/232 | 12-Pin 3.5mm pitch phoenix terminals with IO isolator, which are equipped with electrostatic and surge protection. Different numbers of RS232 and RS485 ports can be selected according to actual application. The signal of RS485 is defined as IGND/A/B, and the signal of RS232 is defined as IGND/TX/RX.
|
| Audio | 1 x Audio In/Stereo Out, 3.5mm audio jack connector. It can be used as MIC IN and LINE OUT.
|
| 1000M Ethernet | 1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network. |
| 100M Ethernet | 1 x adaptive 10/100M ethernet port, RJ45 connector. It can be used to access the network. |
| CAN | 2 x CAN ports, 6-Pin 3.5mm pitch phoenix terminals.
|
| DI | 8 x DI ports, 10-Pin 3.5mm pitch phoenix terminals
|
| DO | 8 x DO ports, 10-Pin 3.5mm pitch phoenix terminals
|
| SD Card Slot | 1 x Micro SD card slot, which is used to install Micro SD card for storing user data. |
| SIM Card Slot | 1 x Nano SIM card slot, which is used to install Micro SIM card for getting 4G signal. |
| Micro USB | 1 x PROGRAMMING port, which supports to flash to eMMC for the system. |
| HDMI | 1 x HDMI port, Type-A connector. It is compatible with HDMI 2.0 and supports 4K 60Hz. |
| USB 2.0 | 2 x USB 2.0 ports, Type-A connector, supporting up to 480Mbps. |
| Antenna | 2 x SMA ports (optional), using to connect 4G antenna and Wi-Fi/BT antenna. |
| Speaker | 1 x PA output, built-in a 4Ω 5W speaker. |
| Buttons and Indicators | |
|---|---|
| Reset | 1 x Reset button, which can reset the device. |
| PWR | 1 x red power indicator, which is used to check the status of device power-on and power-off. |
| 4G | 1 x green 4G indicator, which is used to check the status of 4G signal. |
| ACT | 1 x green system indicator, which is used to check the working status of device. |
| USER | 1 x green user indicator, user can customize a status according to actual application. |
| COM1~COM4 | 4 x green UART indicators, using to check the communication status of UART ports. |
| CANB0~CANB1 | 2 x green CAN indicators, using to check the communication status of CAN ports. |
| X0~X7 | 8 x green DI indicators, using to check the input status of DI ports. |
| Y0~Y7 | 8 x green DO indicators, using to check the output status of DO ports. |
| LCD | |
|---|---|
| Type | 13.3" TFT |
| Resolution | 1920 x 1080 |
| Color Number | 16.7M |
| Active Area | 293.76mm (H) x 165.24mm (V) |
| Backlight | LED |
| Luminance | 450cd/m2 |
| Contrast Ratio | 1500:1 |
| Response Time | 25ms |
| Viewing Angle (CR≥10) | 80° (L) / 80° (R) / 80° (U) / 80° (D) |
| Touch Screen | |
|---|---|
| Type | Capacitive Touch Screen |
| Multi-touch | Up to 5 points |
| Communication Method | USB |
| Transmittance | ≥85％ |
| Surface Hardness | 6H |
| Expansion Functions | |
|---|---|
| EEPROM | It supports 4K byte storage and improves the ease of use of device. |
| Crypto Authentication | It can be matched to realize the required upper layer application and improves the security of device. |
| RTC | RTC with 1F SuperCAP backup, which can ensure that the system clock is not affected byd evice power-off. We also provide a battery base, and you can buy a CR1220 battery backup for RTC. |
| Buzzer | A tip or an abnormity can be configurated according to actual application, which realizes the alarm function. |
| Watch Dog* | This function has been reserved on hardware. But we need additional software to support it, which is under development. |
| Electrical Characteristics | |
|---|---|
| Input Voltage | 12V ~ 24V DC |
| Power Consumption | 34W (Max) |
| Mechanical Characteristics | |
|---|---|
| Dimensions | 340.2mm x 211.2mm x 66.5mm (WxDxH, antenna is not included.) |
| Weight | About 2.2Kg |
| Installation | Embedded front installation |
| Wireless | |
|---|---|
| Wi-Fi/Bluetooth (optional) | 2.4GHz & 5GHz dual-band Wi-Fi and Bluetooth with antenna.
|
| Environmental & Regulatory | |
|---|---|
| Operating Temperature | -20°C ~ 50°C |
| Storage Temperature | -20°C ~ 60°C |
| Ambient humidity | 5% ~ 95% (non-condensing) |
