EDATEC HMI3020, 7" Industrial Touch Panel Computer,8GB LPDDR4X RAM, 32GB SD Card


  • Experience seamless performance with a 7.0" multi-point capacitive touch screen and a powerful 2.4GHz quad-core CPU.

  • Enjoy versatile connectivity options including dual 4K HDMI outputs, USB 3.0 ports, and gigabit ethernet with optional PoE.

Artikelnummer: 12964

Verfügbarkeit: Zur Zeit nicht an Lager

CHF 306.00
EDATEC
Artikelbeschrieb
Details

7.0-inch Industrial HMI Based on Raspberry Pi 5

  • 7.0" TFT, resolution 1024x600, multi-point capacitive touch screen
  • Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU
  • 8GB LPDDR4X RAM
  • Support Micro SD Card and M.2 NVMe SSD storage expansion
  • 1 x Gigabit ethernet port with optional PoE
  • Optional 8-megapixel front camera
  • 2 x USB 3.0, 2 x USB 2.0, 1 x RS232, 1 x RS485 and 1 x Buzzer
  • Dual 4Kp60 HDMI display output
  • Stereo audio input and output with separately 3.5mm audio jack, built-in speaker
  • 5V DC power input via USB-C, support ON/OFF power button
  • Built-in RTC, support SuperCAP and CR1220 battery backup
  • Aluminum CNC + sheet metal case, fanless design, providing excellent cooling performance
 

Specifications

System
CPU Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76
VPU 4Kp60 HEVC decoder
GPU OpenGL ES 3.1 & Vulkan 1.2
Memory 8GB LPDDR4X-4267 SDRAM
Storage Micro SD Card 32GB
M.2 NVMe SSD, supporting to select the 00GB/128GB/256GB SSD

 

Software
Operating System Raspberry Pi OS(Desktop) 64-bit
Raspberry Pi OS(Lite) 64-bit

 

Front I/O
Camera Built-in 8-megapixel front camera(optional)

 

Side I/O
Audio OUT 1 x Audio Output(HPO), 3.5mm audio jack connector(green), stereo audio output.
Audio IN 1 x Audio Input(LINE IN), 3.5mm audio jack connector(red), supporting stereo audio input.
Speaker 1 x PA output, built-in a 4Ω 3W speaker.
RS485 1 x RS485 port, 3-Pin 3.5mm pitch phoenix terminals with 120Ω terminal resistor.
The signal is defined as GND/A/B.
RS232 1 x RS232 port, 3-Pin 3.5mm pitch phoenix terminals, the signal is defined RS232 as GND/TX/RX.
USB 2.0 2 x USB 2.0 ports, dual layer type A connector, each channel supports up to 480Mbps.
USB 3.0 2 x USB 3.0 ports, dual layer type A connector, each channel supports up to 5Gbps.
1000MEthernet 1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access thenetwork.
PoE can be supported through expansion module.
SD Card Slot 1 x Micro SD card slot, which is used to install Micro SD card. It supports booting the OS from Micro SD card.
HDMI 2 x HDMI ports, Micro HDMI connector, supporting 4K 60Hz
Power 1 x power in port, USB Type-C connector, supporting 5V/5A DC power input.

 

Buttons and Indicators
ON/OFF 1 x power button, which is used to turn on and turn off the device.
PWR 1 x red power indicator, which is used to check the status of device power-on and power-off.
ACT 1 x green system indicator, which is used to check the working status of device.
COM1~COM2 2 x green UART indicators, which is used to check the communication status of UART port.

 

Internal I/O
M.2 M 1 x M.2 M port, M.2 M Key connector, using to connect SSD and other fast peripherals.
It compatibles with M.2 2230, M.2 2242 and M.2 2260, supporting to boot the OS from SSD.

 

LCD
LCD Size 7.0" TFT
Resolution 1024 x 600
Colors 16.7MB
Active Area 154.21mm(H) x 85.92mm(V)
Backlight LED
MTBF >30000h
Pixel Pitch 400cd/m^2
Contrast Ratio 800:1
Response Time 30ms
Viewing Angle (CR≥10) 85°(L)/85°(R)/85°(U)/85°(D)

 

Touch Screen
Type Multi-point Capacitive Touch Screen
Transmittance ≥85%
Connection Method COF
Controller Interface I2C
Driver Support Linux
Multi-touch 10 points
Surface Hardness 6H

 

Expansion Functions
RTC RTC with 1F SuperCAP backup, which can ensure that the system clock is not affected bydevice power-off.
We also provide a battery base, and you can buy a CR1220 batterybackup for RTC.
Buzzer A tip or an abnormity can be configurated according to actual application, which realizesthe alarm function.

 

Electrical Characteristics
Input Voltage 5V DC
Power Consumption 25W(Max)

 

Mechanical Characteristics
Dimensions 188mm x 123mm x 40.6mm (WxDxH)
Weight About 900g
Installation Embedded front installation

 

Wireless
Wi-Fi Dual-band 802.11ac Wi-Fi
Bluetooth Bluetooth 5.0 / Bluetooth Low Energy (BLE)

 

Environmental & Regulatory
Operating Temperature -20°C ~ 60°C
Storage Temperature -25°C ~ 60°C
Ambient humidity 5% ~ 95% (non-condensing)
Certifications FCC
FCC 47 CFR Part 15 Subpart B
CE
EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3
EN 55032/EN 55035
EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52
EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2