Sie haben keine Artikel im Warenkorb.
EDATEC CM4Sensing Industrial IoT and Data Acquisition Computer 4GB RAM and 32GB Storage
- Powered by a quad-core ARM Cortex-A72 processor, this industrial IoT computer offers robust performance with 4GB RAM and 32GB eMMC storage, expandable via Micro SD.
- Features dual-band Wi-Fi, Bluetooth, 4G LTE, and multiple connectivity options including Gigabit Ethernet, HDMI, USB, RS232, RS485, and CAN, all housed in a durable metal case suitable for DIN-rail installation.
Artikelnummer:
12945
Verfügbarkeit: Zur Zeit nicht an Lager
CHF 233.30
Artikelbeschrieb
Details
|
Specifications
| System | |
|---|---|
| CPU | Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz |
| VPU | H.265 (HEVC), up to 4Kp60 decode H.264, up to 1080p60 decode, 1080p30 encode |
| GPU | OpenGL ES 3.1 & Vulkan 1.0 |
| Memory | 4GB LPDDR4-3200 SDRAM |
| Storage | 32GB eMMC storage Micro SD card (user storage expansion) |
| Software | |
|---|---|
| Operating System | Raspberry Pi OS (Desktop) 32-bit Raspberry Pi OS (Lite) 32-bit Raspberry Pi OS (Desktop) 64-bit Raspberry Pi OS (Lite) 64-bit |
| Front I/O | |
|---|---|
| Power | 1 x DC IN, DC Jack connector, supporting 8V~28V input. |
| RS232 | 1 x RS232 port, 3-Pin 2.5mm pitch phoenix terminals, the signal is defined as GND/TX/RX. |
| CAN | 1 x CAN port, 3-Pin 2.5mm pitch phoenix terminals, the signal is defined as GND/CL/CH. |
| RS485 | 4 x RS485 ports, 12-Pin 2.5mm pitch phoenix terminals, the single signal is defined as GND/A/B. |
| Rear I/O | |
|---|---|
| SD Card Slot | 1 x Micro SD card slot, using to install Micro SD card for storing user data. |
| SIM Card Slot | 1 x Nano SIM card slot, using to install Nano SIM card for getting 4G signal. |
| HDMI | 1 x HDMI port, Type-A connector. It is compatible with HDMI 2.0 standard and supports 4K 60Hz. |
| USB 2.0 | 2 x USB 2.0 ports, Type-A connector, supporting up to 480Mbps transmission rate. |
| 1000M Ethernet | 1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network |
| Side I/O | |
|---|---|
| Antenna | 2 x SMA ports (optional), using to connect 4G antenna and Wi-Fi/BT antenna. |
| Buttons and Indicators | |
|---|---|
| Power | 1 x red power indicator, which is used to check the status of device power-on and power-off. |
| Status | 1 x green system indicator, which is used to check the working status of device. |
| Internal I/O | |
|---|---|
| Micro USB | 1 x Micro USB port, supporting to flash to eMMC for the system. |
| 5V 1A | 1 x DC OUT, 2-Pin 1.0mm pitch connector, support 5V 1A output. These pins are defined as GND/5V. |
| HDMI | 1x FPC HDMI, 40-Pin 0.5mm pitch FPC connector, which can be reserved to connect extended LCD, supports USB/I2C touch screen and backlight adjustment. |
| DSI | 1 x FPC DSI, 30-Pin 0.5mm pitch FPC connector, which can be reserved to connect extended LCD, supports USB/I2C touch screen and backlight adjustment. |
| Expansion Functions | |
|---|---|
| RTC | RTC with CR1220 battery backup, which can ensure that the system clock is not affected by device power-off. Note: A CR1220 battery is provided by default in China. |
| Buzzer | A tip or an abnormity can be configurated according to actual application, which realizes the alarm function. |
| Electrical Characteristics | |
|---|---|
| Input Voltage | 8V ~ 28V DC |
| Power Consumption | 18W (Max) |
| Mechanical Characteristics | |
|---|---|
| Dimensions | 102mm x 73mm x 35.2mm (WxDxH, DIN-rail bracket and antenna are not included.) |
| Weight | 500g |
| Installation | DIN-rail installation |
| Wireless | |
|---|---|
| Wi-Fi/Bluetooth (optional) |
2.4GHz & 5GHz dual-band Wi-Fi and Bluetooth with antenna.
|
| 4G (optional) |
EC25-EUX Module (Europe/Middle East/Africa/Thailand)
|
| Environmental & Regulatory | |
|---|---|
| Operating Temperature | -25°C ~ 60°C |
| Storage Temperature | -25°C ~ 60°C |
| Ambient humidity | 5% ~ 95% (non-condensing) |
| Certifications |
|
