ED-PSU1204 DC 12V 4A Power Adapter DC Plug

High-efficiency 48 W AC/DC power adapter with universal 100–240 VAC input. Designed with comprehensive protection features including over-voltage, over-current and short-circuit protection. Equipped with a fixed 1.5 m cable and 5.5 × 2.5 mm DC plug (center positive), ideal for consumer electronics, displays and general-purpose devices.

Artikelnummer: 12817

Verfügbarkeit: Zur Zeit nicht an Lager

CHF 17.90
EDATEC
Artikelbeschrieb
Details
Input Parameters
Rated input voltage 100-240Vac
Operating range 90-264Vac
Rated input frequency 50/60Hz(±3Hz)
Rated input current ≤1.5A
Power Consumption (no-loading) ≤0.1W
Primary current protection An adequate internal fuse on the AC input line is provided
Configuration 2 Conductor

 

Output Parameters
Nominal DC output voltage +12.0V
Minimum load current 0A
Rating load current 4.0A
Peak load current /
Rating output power 48.0W
Line regulation The line regulation is less than ±5% while measuring at rated load and ±10% of input voltage changing.
Load regulation The load regulation for +12.0Vis less than ±5%, at measured output load from 10% to 100% rated load.
Ripple and noise
  • 200 mVp-p
  • Measurement Conditions:
    • Add 0.1uF/50V ceramic capacitor and 10uF/50V aluminum electrolytic capacitor across the output terminal.
    • Measured with 20MHz Bandwidth Oscilloscope.
Average efficiency
  • 87.77% minimum
  • Measurement Conditions:
    • Input voltage: 115V/60Hz and 230V/50Hz
    • Output current: 100%, 75%, 50%, 25%
Turn on delay time 4000 mS max, at nominal input AC voltage and full load.
Rise time The supply shall have a start-up rise time of less than 20 mS to rise to within regulation limits for all DC outputs.
Hold up time 8 mS minimum at nominal input 100Vac minimum voltage and full load.
Output over-shoot Less than 10% of nominal voltage value.
Over-voltage protection The output voltage shall be clamped by internal protection.
Short-circuit protection
  • The adapter shall not be damaged by short the DC output to Ground.
  • The adapter shall resume normal operation when a short circuited fault condition is removed.
Over current protection The output shall be protected against the over current conditions.

 

Mechanical Characteristics
Plastic case UL94V-0
Weight About 210g
Dimensions 93mm x 33mm x 57.5mm
Color BlackK
Input pin EU type
Output connector
  • 5.5 mm DC Plug
  • Polarity: Center “+”
Cable
  • Length: 1.5m
  • Standards: VW-1 80℃ 300V 1185 3.5Q 18AWG BLACK
  • Environmental Requirements: PAHS REACH ROHS PROP65

 

Environmental Requirements
Operating Temperature 0°C~40°C
Storage Temperature -20°C~70°C
Operating Humidity 10%~90% (Non Condensing)
Storage Humidity 10%~90% (Non Condensing)