Sie haben keine Artikel im Warenkorb.
ED-HMI2320, 12.1" Industrial Computer, 8GB RAM & 32GB eMMC, without Wi-Fi - CM4 based
ED-HMI2320, 12.1" Industrial Computer, 8GB RAM & 32GB eMMC, module without Wi-Fi, without 4G/LTE Module, without PoE module, without RS485, - CM4 based
Artikelnummer:
12427
Verfügbarkeit: Zur Zeit nicht an Lager
CHF 585.90
Artikelbeschrieb
Details
| ED-HMI2320 Series Features |
| Industrial Panel PC Based on Raspberry Pi CM4 |
| Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz |
| 8GB LPDDR4 RAM and 32GB eMMC storage |
| Support Micro SD card and mSATA SSD storage expansion |
| Support HDMI+LVDS touchscreen dual displays, HDMI supports up to 4Kp60 |
| 1 x Gigabit Lan (dual Lans are optional) |
| 2 x USB 3.0, 2 x USB 2.0(optional) & 3 x RS232 |
| Wide voltage power input range of DC 9V~36V with reverse polarity protection, overvoltage protection, and overcurrent protection |
| Integrated supercapacitor, RTC, Watch Dog, EEPROM and crypto authentication |
| High-quality metal case, compatible with desktop installation |
Specifications
| CPU | Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz |
| VPU | H.265(HEVC), up to 4Kp60 decode H.264, up to 1080p60 decode, 1080p30 encode |
| GPU | OpenGL ES 3.1 & Vulkan 1.0 |
| Memory | 8GB LPDDR4-3200 SDRAM |
| Storage | 32GB eMMC storage Micro SD card (user storage expansion) Options for 128G and 256G mSATA SSD |
|
Software
|
|
| Operating System |
- Raspberry Pi OS(Desktop) 32-bit
- Raspberry Pi OS(Lite) 32-bit
- Raspberry Pi OS(Desktop) 64-bit
- Raspberry Pi OS(Lite) 64-bit
|
|
Side I/O
|
|
| Power | 1 x DC IN, DC Jack connector, with reverse polarity protection, overvoltage protection, and overcurrent protection. It supports 9V~36V input. |
| HDMI | 1 x HDMI port, type A connector, which compatibles with HDMI 2.1 standard and supports 4K 60Hz. |
| COM | 3 x RS232 port, DB9 male connector, using the 2, 3 and 5 pins, the corresponding signal is defined as RX/TX/GND. |
| USB 3.0 | 2 x USB 3.0 ports, type A connector, support up to 5Gbps. |
| 1000M Ethernet | 1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network. PoE can be supported through expansion module. |
| USB 2.0 | 2 x USB 2.0 ports, type A connector, which support up to 480Mbps. |
| MIC IN | 1 x MIC Input, 3.5mm audio jack connector(red), which can connect to microphone. |
| LINE OUT | 1 x MIC Input, 3.5mm audio jack connector(red), which can connect to microphone. |
| Antenna (optional) | 2 x SMA ports, use to connect 4G antenna and Wi-Fi/BT antennas. |
| Buttons and Indicators | |
| Power Switch | 1 x Power button, with led indicator Press the button for a short time to start up the device and the indicator will light up. Press the button for a long time to shut down the device forcibly, then the indicator will be off. |
| Internal I/O | |
| Speaker |
1 x PA output, built-in two 8Ω 2W stereo speakers.
|
| SD Card Slot | 1 x Micro SD card slot, which is used to install SD card for storing user data. |
| SIM Card Slot | 1 x Standard SIM card slot, which is used to install SIM card for getting 4G signal. |
| mSATA | 2 x mSATA ports, Mini PCIe connector, which is used to connect 4G Module and mSATA SSD. The user can select 128G or 256G mSATA SSD. |
| Expansion Performance | |
| Auto-boot |
It supports automatic power-on function by default.
|
| EEPROM | It supports 4K byte storage and improves the ease of use of device. |
| Crypto Authentication | It can be matched to realize the required upper layer application and improves the security of device. |
| RTC | Ensure that the system clock is not affected by device power-off. Note: A CR2032 battery is provided by default in China. |
| Buzzer | A tip or an abnormity can be configurated according to actual application, which realizes the alarm function. |
| Watch Dog | Realize the hardware Watch Dog based on the RTC alarm function to ensure the reliability of device. |
| LCD | |
| ED-HMI2320-121C | |
| LCD Size | 12.1" TFT |
| Resolution | 800 x 600 |
| Screen Ratio | 4:3 |
| Display Colors | 16.7MB |
| Active Area | 246mm(H) x 184.5mm(V) |
| Backlight | LED |
| MTBF | 50000h |
| Pixel Pitch | 0.3075mm x 0.3075mm |
| Contrast Ratio | 1000:1 |
| Response Time | 5ms |
| Viewing Angle (CR≥10) | 70°(L)/70°(R)/50°(U)/60°(D) |
| Input Type | LVDS |
| Touch Screen | |
| Type | Multi-point Capacitive Touch Screen |
| Multi-touch | 10 points |
| Transmittance | 85％±5% |
| Communication Interface | USB |
| Touches | More than 50 million times |
| Resolution | 4096 x 4096 |
| Surface Hardness | Not less than 6H |
| Electrical Characteristics | |
| Input Voltage | 9V ~ 36V DC |
| Maximum Power Consumption | 60W(Max) |
|
Mechanical Characteristics
|
|
| ED-HMI2320-121C | |
| Dimensions (W x H x D, mounting bracket is not included.) |
332mm x 270mm x 69mm |
| Weight | 3.25Kg |
| Installation | Wall mounting and desktop mounting |
| Environmental & Regulatory | |
| Operating Temperature | -25°C ~ 60°C |
| Storage Temperature | -25°C ~ 60°C |
| Ambient Humidity | 5% ~ 95% (non-condensing) |
| Certifications |
FCC
FCC 47 CFR Part 15 Subpart B
CE EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3
EN 55032/EN 55035/
EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52
EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2
|
