Sie haben keine Artikel im Warenkorb.
ED-HMI2020, 10.1'' Industrial Panel Computer, 8 GB RAM & 32 GB eMMC without Wi-Fi - CM4 based
EDATEC Industrial Panel Computer ED-HMI2020, 10.1", without Wi-Fi & Bluetooth, 8 GB RAM, 32 GB eMMC
Artikelnummer:
12351
Verfügbarkeit: Zur Zeit nicht an Lager
CHF 324.00
Downloads & Links
Handbücher
Artikelbeschrieb
Details
| ED-HMI2020 Series Features | |
| Functions | Parameters |
| CPU | Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GH |
| RAM | 8GB LPDDR4 RAM |
| Storage | 32GB eMMC and support micro-SD Card |
| Wireless | no Wi-Fi and Bluetooth |
| Interface | 1 x Gigabit Ethernet, 1 x HDMI Type A, 2 x USB 3.0, 1 x USB 2.0 |
| Power Input | DC 9V~28V with reverse polarity, overvoltage & overcurrent protection; DC Jack & Phoenix connector optional, no PoE |
| Other | RTC with CR1220 battery, EEPROM and Crypto Authentication, Buzzer, Reset button, 2 x LED indicators |
| Operating Temperature | -20℃~60℃ |
| Mechanical | High-quality metal case, Embedded front |
| ED-HMI2020 Series Guide | |||||||||
| Model No. | LCD Size | Resolution | Aspect ratio | # of Colors | Luminance (cd/m2) |
Viewing Angle (H/V) |
Multi-touch (# of points) |
Dimensions (mm) |
Weight (Kg) |
| HMI2020-101C | 10.1" | 1280x800 | 16:10 | 16.7M | 400 | 160°/160° | 10 | 258 x 172 x 40 | 1.4 |
| System | |
| CPU | Broadcom BCM2711, quad core Arm Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz |
| VPU | H.265(HEVC), up to 4Kp60 decode H.264, up to 1080p60 decode, 1080p30 encode |
| GPU | OpenGL ES 3.1 & Vulkan 1.0 |
| Memory | 8GB LPDDR4-3200 SDRAM |
| Storage |
- 32GB eMMC storage
- Micro SD card (user storage expansion)
|
|
Software
|
|
|
Operating System
|
- Raspberry Pi OS(Desktop) 32-bit
- Raspberry Pi OS(Lite) 32-bit
- Raspberry Pi OS(Desktop) 64-bit
- Raspberry Pi OS(Lite) 64-bit
|
| Front I/O | |
| Camera | without Camera |
|
Side I/O
|
|
| Power | 1 x DC IN, DC Jack connector, supports 9V~28V input. |
| Audio |
1 x Audio In/Stereo Out, 3.5mm audio jack connector. It can be used as MIC IN and LNE OUT.
- When a headphone is connected, the audio output switches to the headphone.
- When no headphone is connected, the audio output switches to the speaker.
|
|
1000M Ethernet
|
1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network. PoE can be supported through expansion module.
|
| SD Card Slot | 1 x Micro-SD card slot, uses to install SD card for storing user data. |
| HDMI | 1 x HDMI port, type A connector. It compatibles with HDMI2.1 standard and supports 4K 60Hz. |
| USB 2.0 | 1 x USB 2.0 port, type A connector, which supports up to 480Mbps Transmission rate. |
| USB 3.0 | 2 x USB 3.0 ports, type A connector, which support up to 5Gbps Transmission rate. |
| Antenna | 1 x SMA port, using to connect Wi-Fi/BT antenna. |
| Speaker | 1 x PA output, built-in a 4Ω 3W speaker. |
| Buttons and Indicators | |
| Reset | 1 x Reset button, which can reset the device. |
| Rpiboot | 1 x PROGRAMMING button, which is used to flash to eMMC for the system. |
| PWR | 1 x red power indicator, uses to check the status of device power-on and power-off. |
| ACT | 1 x green system indicator, uses to check the working status of device. |
| Expansion Performance | |
| EEPROM | Supports 4K byte storage and improves the ease of use of device. |
|
Crypto
Authentication
|
It can be matched to realize the required upper layer application and improves the security of device.
|
| RTC |
Ensure that the system clock is not affected by device power-off.
Note: A CR1220 battery is provided by default in China.
|
| Buzzer |
A tip or an abnormity can be configurated according to actual application, which realizes the alarm function.
|
| Expansion I/O | |
| 12V 1A |
1 x DC OUT, 2-Pin 2.0mm spacing connector, support 12V 1A output. These pins
are defined as GND/12V, reserve to provide power supply for extended LCD.
|
| 40-pin GPIO |
1 x GPIO, 2x20-Pin 2.54mm pitch header, uses to lead out the GPIO ports of CM4.
- These pins are defined as GPIO1~GPIO27/3V3/5V2/GND.
- Compatibles with expansion modules, and reserves to connect expansion accessories.
|
| HDMI |
1 x FPC HDMI, 40-pin 0.5mm spacing FPC connector, which can be reserved to connect extended LCD, supports USB/I2C touch screen and backlight adjustment.
|
| USB | 1 x USB 2.0, 5-pin 1.27mm spacing FPC connector, supports to expand the USB 2.0 interface. |
| LCD | |
| ED-HMI2020-101C | |
| LCD Size | 10.1" TFT |
| Resolution | 1280x800 |
| Colors | 16.7MB |
| Active Area | 216.576mm(H) x 135.36mm(V) |
| Backlight | LED |
| MTBF | >30000h |
| Luminance | 400cd/m^2 |
| Contrast Ratio | 1000:1 |
| Response Time | 30ms |
| Viewing Angle(CR≥10) | 80°(L)/80°(R)/80°(U)/80°(D) |
| Touch Screen | |
| Type | Multi-point Capacitive Touch Screen |
| Transmittance | ≥85％ |
|
Connection Method
|
COF |
|
Controller Interface
|
I2C |
| Driver Support | Linux |
| Multi-touch | 10 points |
|
Surface Hardness
|
6H |
| Electrical Characteristics | |
| Input Voltage | 9V ~ 28V DC |
|
Maximum Power Consumption
|
20W |
|
Mechanical Characteristics
|
|
| ED-HMI2020-101C | |
| Dimensions | 258mm x 172mm x 40mm (WxDxH, antenna is not included.) |
| Weight | 1.1Kg |
| Installation | Embedded front installation |
| Environmental & Regulatory | |
|
Operating
Temperature
|
-20°C ~ 60°C |
|
Storage
Temperature
|
-25°C ~ 60°C |
|
Ambient Humidity
|
5% ~ 95% (non-condensing) |
| Certifications |
FCC
FCC 47 CFR Part 15 Subpart B
CE EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3
EN 55032/EN 55035/
EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52
EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2
|
