9.7inch E-Ink display HAT for Raspberry Pi (1200x825)

9.7inch E-Ink display HAT for Raspberry Pi (1200x825)
Artikelnummer: 10842

Delivery Time: ab Lager

Verfügbarkeit: Sofort-Versand ab Lager

CHF 189.90
Waveshare
Artikelbeschrieb
Details

Description

1200x825, 9.7inch E-Ink display HAT for Raspberry Pi, IT8951 controller, USB/SPI/I80/I2C interface
 

Overview

This is an E-Ink display HAT for Raspberry Pi, 9.7inch, 1200x825 resolution, with embedded controller IT8951, communicating via USB/SPI/I80/I2C interface.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

  • No backlight, keeps displaying last content for a long time even when power down
  • Low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
  • USB/SPI/I80/I2C interface, for connecting with host boards like Raspberry Pi/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/STM32)

Specifications

  • Operating voltage: 5V
  • Interface: USB/SPI/I80/I2C
  • Outline dimension: 218.8mm × 156.425mm × 1.15mm
  • Display size: 202.8mm × 139.425mm
  • Dot pitch: 0.169 × 0.169
  • Resolution: 1200 × 825
  • Display color: black, white
  • Gray scale: 2-16 (1-4 bit)
  • Full refresh time: <1s
  • Total refresh power: 0.6W(typ.)
  • Total standby power: 0.3W(typ.)
  • Viewing angle: >170°

SPI Pinouts

SYMBOLDESCRIPTION
5V Power input
GND Ground
MISO SPI MISO pin
MOSI SPI MOSI pin
SCK SPI SCK pin
CS SPI chip selection, low active
RST External reset, low active
HRDY Busy status output, low active

 

e-Paper IT8951 Driver HAT Dimensions

9.7inch e-Paper HAT e-Paper IT8951 Driver HAT dimensions

Development Resources

Wiki : www.waveshare.com/wiki/9.7inch_e-Paper_HAT

 

Weight: 0.13 kg

  1. 9.7inch e-Paper x1
  2. e-Paper IT8951 Driver HAT x1
  3. 9.7inch e-Paper Adapter x1
  4. 33PIN FFC (same side contact) x1
  5. RPi screws pack (2pcs) x1
  6. PH2.0 20cm 8Pin x1
1
2+3+4
5
6