Sie haben keine Artikel im Warenkorb.
Dual Ethernet Base Board For Raspberry Pi CM5
- Enhance your Raspberry Pi CM5 with dual Ethernet ports, dual 4K HDMI outputs, and dual MIPI interfaces for versatile connectivity and high-performance applications.
- Features include a 40PIN GPIO header, dual USB 3.2 Gen1 ports, and PoE module support, making it ideal for industrial and network applications.
Artikelnummer:
12861
Verfügbarkeit: Sofort-Versand ab Lager
CHF 61.60
Artikelbeschrieb
Details
Dual Ethernet Base Board For Raspberry Pi CM5, Supports 4G / 5G Module, Dual 4K Display Outputs And Dual MIPI Interfaces, Onboard 40PIN GPIO Header And Dual USB 3.2 Gen1 Ports, PoE Module Support
About Compute Module 5
- Upgraded processor BCM2712, quad-core Cortex-A76 64-bit SoC, more powerful performance
- More options for RAM (2GB / 4GB / 8GB / 16GB)
- More options for eMMC Flash (0GB (Lite) / 8GB / 16GB / 32GB / 64GB)
- Faster eMMC Flash storage, up to 200 Mbps data rate
- Optional for certified radio module, supports either PCB trace antenna or external antenna, more suitable for industrial applications
- Adopts B to B connectors, most compatible with Compute Module 4
- Onboard Gigabit Ethernet PHY supporting IEEE1588, suitable for network applications
- Onboard PCIe Gen 2 x1 interface, allows connecting more useful modules
Specifications
| CM5 socket | Suitable for all variants of Compute Module 5 |
|---|---|
| Networking | 1000M Ethernet RJ45 port × 1 2500M Ethernet RJ45 port × 1 |
| Connector | Raspberry Pi 40PIN GPIO header |
| USB | USB 3.2 Gen1 × 2 |
| MIPI | 4-lane MIPI interface × 2 (22PIN 0.5mm FFC connector) |
| Video | HDMI port × 2, supports dual 4K display outputs |
| M.2 | M.2 M KEY (PCIe Gen2/3 x 1) |
| M.2 (4G / 5G) | M.2 M KEY, supports connecting 4G / 5G communication module |
| Storage | TF card socket for Compute Module 5 Lite (without eMMC) variants |
| Fan Header | 5V, 4PIN JST-SH PWM fan connector |
| Power Input | 7V~36V wide voltage range DC jack, 5V 5A Type-C port |
| Dimensions | the base board: 99.60 × 87.00 (mm) |
What's On Board
- CM5 socket
suitable for all variants of Compute Module 5 - 40PIN GPIO header
suitable for connecting to various HAT / HAT+ modules - M.2 M key
supports 2242 / 2230 NVMe Solid State Drives or AI modules - Programming
used for eMMC burning or USB OTG - BOOT switch
switch to ON: burning mode
switch to OFF: system normal startup mode - PSW power button
Long press to force power off, short press to soft power off or on - System indicators
- M.2 M key status indicators
- RTC battery holder
supports CR / ML 1220 button cell - Dual MIPI interfaces
for connecting to DSI displays or CSI cameras - DC power jack
DC 5.5 2.1 jack, supports DC 7V ~ 36V power supply - M.2 B key
supports connecting 4G/5G communication module - Dual USB 3.2 Gen1 ports
USB 3.2 Gen1 Type-A ports, up to 5Gbps - FAN header
for connecting cooling fan, 5V, 4PIN JST-SH PWM fan connector - M.2 M key status indicator
keeps blinking when NVMe drive is reading / writing - Dual HDMI ports
supports dual 4K outputs - PoE header
for connecting PoE module, supports PoE power supply through 1000M Ethernet port using PoE switch - 1000M Ethernet RJ45 port
supports 10M / 100M / 1000M network connections - 2500M Ethernet RJ45 port
supports 10M / 100M / 1000M / 2500M network connections - USB to 2500M Ethernet chip
- IO-VREF selection
CM5 IO logic level: 3.3V (default) or 1.8V - Other function pins
Hardware disable function, write protection and chip address selection - TF card slot
for connecting a TF card with pre-burnt image (Lite variant ONLY) - NANO SIM card slot
- USB3.0 HUB
