EDATEC CM4 Sensing incl. CM4101008

• ED- CM4SEN provides 4G/LTE module, 4 channels RS485,1 channel RS232, 1 channel CAN, 1 channel Gigabit Ethernet port, alarm buzzer ,battery-powered real-time clock
• The DSI interface of ED-CM4SEN are fully compatible with Raspberry Pi4 Model B, supports Raspberry Pi official 7" touch display. A 5V/1.5A power output provides the power for Pi Display, the Standard HDMI interface can output 4K HD video.
• ED-CM4SEN provides 2 channels USB2.0 and 1 channel Micro USB2.0 interfaces, and Micro USB interface is used to update the system image.
• The system supports +12V~18VDC power input, the dimension of ED-CM4SEN is 103*73*32mm, which is slightly larger than Pi4 Model B. The connectors come out from front and back end, a 103*73mm*5mm heat sink provides excellent cooling performance for CPU, wireless module and PMU, the whole system can work reliably in a high temperature environment.
• Based on our real testing in the lab, ED-CM4SEN can work reliably at ambient temperature of -25~60°C.
• Four M2.5 screw holes are reserved at the case bottom of the ED-CM4SEN, which is convenient for users to install the ED-CM4SEN on other equipment, it also supports DIN rail mounting

Processing capacity:

• Broadcom BCM2711 4-core Cortex A72 1.5GHz (ARM v8) 64-bit CPU
• Support H.265 (HEVC) (up to 4Kp60 decoding), H.264 (up to 1080p60 decoding, 1080p30 encoding)
• OpenGL ES 3.0 graphics
• Memory 1GB LPDDR4-3200 SDRAM optional
• 8GB eMMC optional

Industrial interface:

• 4 x RS485 
• 1 x RS232 
• 1 x CAN 
• 1 x RTC with backup battery
• 1 x Red LED power indicator,
• 1 x Green LED status indication
• 1 x buzzer

Display:

• 1 x Standard HDMI port
• 1 x HDMI by FPC cable
• 1 x DSI interface+1 x [email protected] output, support Raspberry Pi official display

Wired interface:

• 1 x 10/100M/1000 Ethernet
• 2 x USB2.0 (external)
• 1 x Micro USB2.0 (Inside the case, for programming)

Wireless communication:

• 1 x 4G/LTE module
• 1 x 2.4G/5.8G WiFi compatible with IEEE 802.11 b/g/n/ac standard
• 1 x Bluetooth 5.0 BLE
• Official Raspberry Pi WiFi/BLE external antenna

Storage:

• 1 x microSD card holder (used to expand user data storage)

Expansion interface:

• 1 x Mini PCI-e socket for PCIe Gen2 x1

Power supply:

• 12~18V DC voltage range input
• 5.5/2.5mm DC Jack or Phoenix terminal connector optional

Operating temperature:

• -25~60°C

Dimension:

• 103 mm(L) x 73 mm(W) x 32mm(H)

Software Environment:

• Raspberry Pi Raspbian OS installed
• Support remove software upgrade