2.9inch Touch E-Paper E-Ink Display HAT
Delivery Time: ab Lager
Verfügbarkeit: Sofort-Versand ab Lager
Capacitive Touch, Partial Refresh, Low Power, Wide Viewing Angle, Paper-Like Effect
Ideal for price tags, shelf labels, industrial instruments...
Features
- Size2.9"
- Resolution296×128
- Viewing Angle>170°
- Display ColorBlack and White
- Grey Scale2
- Touch TypeCapacitive
- Touch Points5-Points
- Touch PortI2C
- Touch PanelToughened Glass
- CommunicationSPI
- Power ConsumptionUltra Low
- Display DurationPersists without Power
- Display PanelE-paper
- ExperiencePaper-like
- Comfortably ReadingEye Care, No Bluelight
- EnvironmentAmbient Light Required
- Display TypePassively Reflective
- RefreshingPartial Refresh Support
Features At A Glance
- 2.9inch capacitive touch ePaper module, 296×128 resolution
- 5-points touch support, user-defined wakeup gesture
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Reversed control interface, for connecting with controller boards like Arduino/STM32, etc.
- Comes with development resources and manual (examples for Raspberry Pi)
Specifications
OPERATING VOLTAGE | 3.3V/5V | DISPLAY COLOR | black, white |
---|---|---|---|
INTERFACE | 3-wire SPI, 4-wire SPI | GREY SCALE | 2 |
OUTLINE DIMENSIONS | 89.10 × 42.70mm | PARTIAL REFRESH TIME | 0.3s |
DISPLAY SIZE | 66.89 × 29.05mm | FULL REFRESH TIME | 2s |
DOT PITCH | 0.227 × 0.226mm | REFRESH POWER | 26.4mW (typ.) |
RESOLUTION | 296×128 pixels | STANDBY CURRENT | <0.01uA (almost none) |
TOUCH POINTS | 5 | VIEWING ANGLE | >170° |
Advantages Of EINK
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
Standard Raspberry Pi 40PIN GPIO Header
Compatible With Raspberry Pi Series Board
Reversed Control Interface
I2C Bus For Touch Panel, SPI Bus For Display
VCC | 3.3V/5V |
GND | GND |
DIN | SPI MOSI pin |
CLK | SPI SCK pin |
CS | SPI chip selection, low active |
DC | Data / Command selection (high for data, low for command) |
ERST | External reset, low active |
BUSY | Busy status output, high active |
INT | Touch controller interrupt pin |
SCL | Touch controller I2C clock pin |
SDA | Touch controller I2C data pin |
TRST | Touch controller reset, low active |
EN | Touch control power supply enable (optional), high active |
Touch Control Power Supply Configuration
The Touch Control Power Supply Is Determined By The Position Of 0R Resistor
0R RESISTOR POSITION | TOUCH CONTROL POWER SUPPLY | DESCRIPTION |
---|---|---|
A | VCC | always powered by VCC (default) |
B | EN | controlled by user I/O |
C | VEN | controlled with ePaper (ERST) |
NC | GND | no power supply for touch control |