13.3" e-Paper e-Ink Display HAT For Raspberry Pi, Black / White
Delivery Time: ab Lager
Verfügbarkeit: Zur Zeit nicht an Lager
13.3" E-Paper Hat for Raspberry Pi
Ideal for e-reader, eink monitor, industrial instruments...
Features
- Size: 13.3"
- Resolution: 1600×1200
- Viewing Angle: >170°
- Display Color: Black and White
- Grey Scale: 2-16 (1-4 bit)
- Communication: USB/SPI/I80
- Display Panel: E-paper
- Experience: Paper-like
- Environment: Ambient Light Required
- Display Type: Passively Reflective
- Refreshing: Partial Refresh Support
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- USB/SPI/I80 interface, for connecting with controller boards like Raspberry Pi/STM32, etc.
- Comes with development resources and manual (examples for Raspberry Pi/STM32)
Specifications
OPERATING VOLTAGE | 5V | DISPLAY COLOR | black, white |
---|---|---|---|
INTERFACE | USB/SPI/I80 | GREY SCALE | 2-16 (1-4 bit) |
OUTLINE DIMENSIONS | 285.80 × 213.65mm | FULL REFRESH TIME | <1s |
DISPLAY SIZE | 270.40 × 202.80mm | REFRESH POWER | 1.2W (typ.) |
DOT PITCH | 0.169 × 0.169mm | STANDBY CURRENT | <0.1W |
RESOLUTION | 1600 × 1200 pixels | VIEWING ANGLE | >170° |
Package Content
- 3.3inch e-Paper x1
- e-Paper IT8951 Driver HAT x1
- 13.3inch e-Paper Adapter x1
- 33PIN FFC (same side contact) x1
- USB type A plug to micro B plug cable x1
- PH2.0 20cm 8Pin x1
- RPi screws pack (2pcs) x1
Advantages Of EINK
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
SPI PINOUT | |
---|---|
5V | Power, 5V input |
GND | Ground |
MISO | SPI MISO pin |
MOSI | SPI MOSI pin |
SCK | SPI SCK pin |
CS | SPI chip selection, low active |
RST | External reset, low active |
HRDY | Busy status output, low active |
Application Examples
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...