EDATEC Industrial Computer based on Raspberry Pi CM0 - IPC1000-10008

Industrial Computer based on Raspberry Pi CM0

Specifications

System

• CPU: 1GHz quad-core 64-bit Arm Cortex-A53 processor  
• VPU: H.264/MPEG-4 video decoding, 1080p@30fps, H.264 encoding, 1080p@30fps 
• GPU: OpenGL ES 1.1/2.0 graphics processing  
• Memory: 512MB SDRAM  
• Storage: 8GB or 16GB eMMC storage available

Software

• • Raspberry Pi OS (Desktop) 64-bit
  • Raspberry Pi OS (Lite) 64-bitOperating System:
  • Raspberry Pi OS (Desktop) 32-bit
  • Raspberry Pi OS (Lite) 32-bit

Front I/O  

• Power: 1 x DC input, DC jack connector, supports 9V~28V input.  
• HDMI: 1 x HDMI port, Type-A connector, compliant with HDMI 1.3a standard, supports 1080p resolution at 30Hz.  
• 100M Ethernet: 1  x adaptive 10M/100M ethernet port, RJ45 connector. It can be used to access the network

Rear I/O  

• Nano SIM Card Slot: 1 x Nano SIM card slot for installing a Nano SIM card to obtain 4G signal.  
• Micro SD Card Slot: 1 x Micro SD card slot, supports installation of a Micro SD card for system boot. Note: The Micro SD card slot is only compatible with the CM0Lite
• Type-C USB Interface: 1 x Type-C USB interface, supports eMMC flashing via this interface

Side I/O

• USB 2.0: 2 x USB 2.0 ports, stacked Type-A connector, each supporting a maximum data transfer rate of 480Mbps.  
• RS485: 1 x RS485 interface, 3-pin 3.5mm pitch phoenix terminal, signal definitions: GND/A/B.  
• Antenna Interface: 2  x Antenna interfaces, SMA connector, for Wi-Fi/BT and 4G antenna

Buttons and Indicators  

• PWR: 1 x red power indicator, used to display the device's power on/off status
• ACT: 1 x green system status indicator, used to monitor the device's operating status  
• 4G: 1 x 4G signal indicator, green, for checking the status of the 4G signal
• USER1 and USER2: 2 x User indicators, green, allowing users to customize the status based on actual needs
• RS485: 1 x RS485 indicator, green, for viewing the communication status of the serial port
• Reset: 1  x reset button, recessed design, pressing the button restarts the device

Expansion Functions  

• RTC: Built-in RTC function with a 1F supercapacitor as the RTC backup power supply

Electrical Characteristics

• Input Voltage: 9V~28V DC, Note: A 12V 2A adapter is recommended.  
• Power Consumption: 12W (Max)

Mechanical Characteristics

• Dimensions: 104mm x 86.4mm x 26mm (W x D x H, DIN-rail bracket and antenna are not included)
• Weight: About 270g  
• Installation: DIN rail mounting

Wireless

• Wi-Fi/Bluetooth: Supports 2.4GHz Wi-Fi and Bluetooth, with an external antenna
  • 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n
  • Bluetooth 5.0: Compatible frequency band 2402MHz ~ 2480MHz
• 4G: Onboard 4G module with antenna
  • EC800M-CN Module (China)
    • LTE FDD: B1/B3/B5/B8
    • LTE TDD: B34/B38/B39/B40/B41
  • EC800K-EU Module (Europe)
    • LTE-FDD: B1/B3/B5/B7/B8/B20/B28
  • EC800Q-NA Module (America)
    • LTE-FDD: B2/B4/B5/B12/B13/B66

Environmental & Regulatory

•  Operating Temperature: -20°C ~ 60°C
• Storage Temperature: -20°C ~ 60°C
• Ambient humidity: 5% ~ 95% (non-condensing)