Sie haben keine Artikel im Warenkorb.
EDATEC Industrial Computer IPC3020 8GB Ram, 256GB SSD - CM5 based
- Powered by a 2.4GHz quad-core Arm Cortex-A76 CPU with 8GB RAM and 256GB SSD for robust performance.
- Features dual 4K HDMI outputs, multiple USB ports, and fanless design for efficient cooling and versatile connectivity.
Artikelnummer:
12951
Verfügbarkeit: Zur Zeit nicht an Lager
CHF 277.80
Downloads & Links
Handbücher
Artikelbeschrieb
Details
|
Specifications
| System | |
|---|---|
| CPU | Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 |
| VPU | 4Kp60 HEVC decoder |
| GPU | OpenGL ES 3.1 & Vulkan 1.2 |
| Memory | 8GB LPDDR4X-4267 SDRAM are optional |
| Storage | SSD 256GB M.2 NVMe SSD |
| Software | |
|---|---|
| Operating System | Raspberry Pi OS (Desktop) 64-bit Raspberry Pi OS (Lite) 64-bit |
| Front I/O | |
|---|---|
| Audio OUT | 1 x Audio Output (HPO), 3.5mm audio jack connector (green), stereo audio output. |
| Audio IN | 1 x Audio Input (LINE IN), 3.5mm audio jack connector (red), supporting stereo audio input. |
| RS485 | 1 x RS485 port, 3-Pin 3.5mm pitch phoenix terminals with 120Ω terminal resistor. The signal is defined as GND/A/B. |
| RS232 | 1 x RS232 port, 3-Pin 3.5mm pitch phoenix terminals, the signal is defined RS232 as GND/TX/RX. |
| USB 2.0 | 2 x USB 2.0 ports, dual layer type A connector, each channel supports up to 480Mbps. |
| USB 3.0 | 2 x USB 3.0 ports, dual layer type A connector, each channel supports up to 5Gbps. |
| 1000M Ethernet | 1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network, supporting optional PoE. |
| Rear I/O | |
|---|---|
| SD Card Slot | 1 x Micro SD card slot, which is used to install SD card. It supports booting the OS from SD card. |
| Side I/O | |
|---|---|
| HDMI | 2 x HDMI ports, Micro HDMI connector, supporting 4K 60Hz |
| Power | 1 x power in port, USB Type-C connector, supporting 5V/5A DC power input. |
| *1: Some Micro HDMI cables have shorter Micro HDMI connectors, which may result in abnormal HDMI connections, so it is recommended to use Raspberry Pi's official Micro HDMI to standard HDMI cable, which can be purchased in the “Optional Accessory” section. | |
| Buttons and Indicators | |
|---|---|
| ON/OFF | 1 x power button, which is used to turn on and turn off the device. |
| PWR | 1 x red power indicator, using to check the status of device power-on and power-off. |
| ACT | 1 x green system indicator, using to check the working status of device. |
| COM1~COM2 | 2 x green UART indicators, which is used to check the communication status of UART port. |
| Internal I/O | |
|---|---|
| M.2 M | 1 x M.2 M port, M.2 M Key connector, using to connect SSD and other fast peripherals. It is compatibles with M.2 2230, M.2 2242 and M.2 2260, supporting to boot the OS from SSD. |
| Expansion Functions | |
|---|---|
| RTC | RTC with 1F SuperCAP backup, which can ensure that the system clock is not affected by device power-off. We also provide a battery base, and you can buy a CR1220 battery backup for RTC. |
| Buzzer | A tip or an abnormity can be configurated according to actual application, which realizes the alarm function. |
| Electrical Characteristics | |
|---|---|
| Input Voltage | 5V DC |
| Power Consumption | 25W (Max) |
| Mechanical Characteristics | |
|---|---|
| Dimensions | 102.8mm x 89.5mm x 32.5mm (WxDxH, antennas are not included.) |
| Weight | About 300g |
| Installation | Placing on the desk and wall mounting |
| Wireless | |
|---|---|
| Wi-Fi | Dual-band 802.11ac Wi-Fi |
| Bluetooth | Bluetooth 5.0 / Bluetooth Low Energy (BLE) |
| Environmental & Regulatory | |
|---|---|
| Operating Temperature | -25°C ~ 60°C |
| Storage Temperature | -25°C ~ 60°C |
| Ambient humidity | 5% ~ 95% (non-condensing) |
| Certifications | FCC FCC 47 CFR Part 15 Subpart B CE EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3 EN 55032/EN 55035 EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52 EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2 |
