Sie haben keine Artikel im Warenkorb.
EDATEC Industrial Computer 2GB RAM, 8GB eMMC, Super Capacitor Module - CM4 based
ED-IPC2110 V1.0, CM4102008, 2GB DDR, 8GB eMMC with Wi-Fi & Bluetooth
2x isolated RS232, 2x isolated RS485, 1x Raspberry Pi certified antenna, with supercapacitor
a set of metal case
Artikelnummer:
12384
Verfügbarkeit: Sofort-Versand ab Lager
CHF 215.90
Downloads & Links
Handbücher
Videos
Artikelbeschrieb
Details
ED-IPC2100 Series, Industrial Computer based on Raspberry Pi CM4
- Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
- with 2GB LPDDR4 RAM and 8GB eMMC storage
- Support Micro SD card and M.2 NVMe SSD storage expansion
- Dual Lans, 1 x Gigabit Ethernet and 1 x 100M Ethernet
- 4 x isolated RS232/485 with electrostatic and surge protection
- 2.4GHz and 5GHz dual-band Wi-Fi, Bluetooth
- Wide voltage power input range of DC 9V~36V with reverse polarity protection, overvoltage protection and overcurrent protection
- Integrated super capacitor (backup power supply, optional) , RTC, Watch Dog, EEPROM and crypto authentication
- Wide temperature range of -25℃~60℃ for working environment
- High-quality metal case, compatible with DIN-rail installation
Features
|
IPC2100 Series Features |
|
| Functions | Parameters |
| CPU | Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz |
| RAM | 2GB LPDDR4 RAM |
| Storage | 8GB eMMC, Support micro-SD Card & M.2 NVMe SSD |
| Wireless | without 4G/LTE Module, but with 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN & Bluetooth 5.0, BL |
| Interface | 1 x Gigabit Ethernet, 1 x 100M Ethernet, 1 x HDMI Type A, 2 x USB 2.0, 1 x Micro USB, multiple RS232 & RS485 |
| Power Input | DC 9V~36V with reverse polarity, overvoltage & overcurrent protection, 3.5mm phoenix connector with screw locked, PoE optional |
| Other | RTC, Hardware Watch Dog, EEPROM & Crypto authentication, Supercaps backup power supply optional, Reset button, Audio output & Microphone optional, 8 LED indicators |
| Operating Temperature | -25℃~60℃ |
| Mechanical | 143mm(W) x 100mm(D) x 35mm(H) , 140mm x 100mm x 5mm aluminum heatsink by CNC cut, Excellent cooling performance, DIN-rail mounting |
Specifications
| System | |
| CPU | Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz |
| VPU |
H.265(HEVC), upto 4Kp60 decode
H.264, up to 1080p60 decode, 1080p30 encode)
|
| GPU | OpenGL ES 3.1 & Vulkan 1.0 |
| Memory | Options 2GB LPDDR4-3200 SDRAM |
| Storage |
- Options for 8GB eMMC storage
- Micro SD card (user storage expansion)
- M.2 NVMe SSD (optional)
|
| Software | |
| Operating System |
- Raspberry Pi OS(Desktop) 32-bit
- Raspberry Pi OS(Lite) 32-bit
- Raspberry Pi OS(Desktop) 64-bit
- Raspberry Pi OS(Lite) 64-bit
|
| Front I/O | |
| Power |
1 x DC IN, 2-Pin 3.5mm spacing phoenix terminals with screw holes.
It supports 9V~36V input, the signal is defined as VIN+/GND.
|
| RS485 |
6-Pin 3.5mm spacing phoenix terminals with IO isolator, equippes with electrostatic and surge protection. Different numbers of RS485 ports can be selected according to actual application, and the single signal is defined as IGND/A/B.
ED-IPC2110: 2 x RS485
|
| RS232 |
6-Pin 3.5mm spacing phoenix terminals with IO isolator, equippes with electrostatic and surge protection. Different numbers of RS232 ports can be selected according to actual application, and the single signal is defined as IGND/TX/RX.
ED-IPC2110: 2 x RS232
|
|
1000M
Ethernet
|
1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network. PoE can be supported through expansion module.
|
|
1000M
Ethernet
|
1 x adaptive 10/100M ethernet port, RJ45 connector. It can be used to access the network. |
| Rear I/O | |
| SD Card Slot | 1 x Micro-SD card slot, uses to install SD card for storing user data. |
| SIM Card Slot | 1 x Nano SIM card slot, uses to install SIM card for getting 4G signal. |
| Micro USB | 1 x Micro USB port, supports to flash eMMC for the system. |
| Side I/O | |
| HDMI |
1 x HDMI port, type A connector. It compatibles with HDMI2.1 standard andsupports 4K 60Hz.
|
| USB2.0 | 2 x USB2.0 ports, type A connector, support up to 480Mbps. |
| Antenna |
2 x SMA ports, use to connect 4G antenna and Wi-Fi/BT antenna.
User can select the antenna according to actual application.
|
| Buttons and Indicators | |
| Reset | 1 x Reset button, which can reset the device. |
| PWR | 1 x red power indicator, uses to check the status of device power-on and power-off. |
| 4G | 1 x green 4G indicator, uses to check the status of 4G singal. |
| ACT | 1 x green system indicator, uses to check the working status of device. |
| USER | 1 x green user indicator, user can customize a status according to actual application. |
| COM1~COM4 | 4 x green UART indicators, uses to check the communication status of UART port. |
| Expansion I/O | |
| 12V 1A |
3 x DC OUT, 2-Pin 2.0mm spacing connector, support 12V 1A output. These pins are defined as GND/12V, reserve to provide power supply for extended LCD.
|
| 5V 1A |
1 x DC OUT, 3-Pin 2.0mmspacing connector, support 12V 1A output. These pins are defined as GND/5V/GND, reserve to provide power supply for extended LCD.
|
| 40-Pin GPIO |
1 x GPIO, 2x20-Pin 2.54mm pitch header, uses to lead out the GPIO ports of CM4.
-These pins are defined as GPIO1~GPIO27/3V3/5V2/GND.
-Compatibles with expansion modules, and reserves to connect expansion accessories.
|
| 10-Pin GPIO |
1 x GPIO Pin Header, 2x5-pin 2.54mm pitch header, uses to lead out the expansion GPIO ports. User can customize the function according to actual application, these pins are defined as 8xGPIO/3V3/GND
|
| USB | 1 x USB 2.0, 5-pin 1.5mm spacing FPC connector, supports to expand the USB2.0 interface. |
| M.2 B |
1 x M.2 B, M.2 B Key connector, supports to connect SSD. It compatibles with M.2 B 2230 and M.2 B 2242 SSD.
|
| Expansion Performance | |
| EEPROM | Supports 4K byte storage and improves the ease of use of device. |
|
Crypto Authentication
|
It can be matched to realize the required upper layer application and improves the security of device.
|
| RTC |
Ensure that the system clock is not affected by device power-off.
Note：A CR1220 battery is provided by default in China.
|
| Buzzer |
A tip or an abnormity can be configurated according to actual application, which realizes the alarm function.
|
| Watch Dog |
Realize the hardware Watch Dog based on the RTC alarm function to ensure the reliability of device.
|
| Electrical Characteristics | |
| Input Voltage | 9V ~ 36V DC |
| Power Consumption | 24W (Max) |
| Mechanical Characteristics | |
| Dimensions | 143mm x 100mm x 35mm (WxDxH, DIN-rail and antenna are not included.) |
| Weight | 750g |
| Installation | DIN-rail mounting |
| Wireless | |
| Wi-Fi |
2.4GHz and 5GHz dual-band Wi-Fi with antenna
- 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n
- 5GHz Wi-Fi: Compatible with IEEE 802.11 a/n/ac
|
| Bluetooth | Bluetooth 5.0 with antenna, compatible with 2402MHz ~ 2480MHz frequency. |
| Environmental & Regulatory | |
| Operating Temperature | -25°C ~ 60°C |
| Storage Temperature | -25°C ~ 60°C |
| Ambient Humidity | 20% ~ 90% (non-condensing) |
| Certifications | FCC FCC 47 CFR Part 15 Subpart B CE EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3
EN 55032/EN 55035/
EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52
EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2
|
