NEW! We've updated this product to be even better, now with ultra high resolution, wide viewing angle and HDMI/VGA/NTSC/PAL input
Yes, this is an adorable small HDMI television with incredibly high resolution! We tried to get the smallest possible HDMI/VGA display with high-res, high-contrast visibility. The visible display measures only 7" (17.8cm) diagonal, and the TFT comes in an enclosure with HDMI, VGA and Composite inputs. The display is very easy to use - simply connect the included 12VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video source to one of the ports. Voila, a television display! There's some little buttons on the front that let you enter a menu system for adjusting brightness, color and contrast. It auto-detects which input you have and switches to that one or you can 'select' from the menu which to display. It comes with a basic stand (shown) and there are four 'mounting thread' holes in the back in a 75mmx75mm square and you can use M4 screws to attach it to an enclosure. There's also a "Camera Mount" 1/4-20 hole in the bottom so you can attach it to a camera-ready mount.
To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI, VGA or NTSC/PAL output. It will not work with a device that only outputs DVI or SECAM.
For use with a Raspberry Pi we suggest editing config.txt to set "hdmi_safe=1" output for best results (otherwise, the Pi may not 'recognize' the HDMI display and revert to composite output).
For use with a BeagleBone black, we found it works when plugged in, no configuration required. You may need a mouse/keyboard to keep the Bone display from going into 'sleep mode'
A 9V US-prong power adapter is included. The power supply may vary from the one shown in the photo, but it will definitely have a US 2-prong plug and will be a switching supply that can be used with 110-240VAC. We also powered it with 12V and it worked fine, and it might work at 5V.
Power with 5-24VDC
700mA power draw at 12V
16:10 display ratio
Resolution: 1200 x 800
Visible area: 150mm x 95mm 16:10
We opened up one of the displays and found an HSD070PWW1 inside, we expect that all of TVs have this display or something similar
Auto-detects between VGA, HDMI and Composite
Display plastic case dimensions: 180mm x 130 x 30
Weight (excluding power cable): 290g/10.2oz
Heute bestellt - morgen geliefert
Alle Bestellungen (bis 14.00h) werden gleichentags verschickt (Zahlungseingang vorbehalten).
Sämtliche Lieferungen werden mit der Schweizer Post per A-Post (PostPac Priority) oder per B-Post (PostPac Economy) ausgeliefert. Wir verrechnen eine Versandpauschale von Fr. 4.90 bzw. Fr 8.90.
Bei Bezahlung mit PostFinance fallen Gebühren in Höhe von Fr. 1.50 plus 2% bzw. mit PayPal/Kreditkarte in Höhen von 2.6% (mindestens Fr. 2.90) an.